User manual GARMIN G1000: KING AIR 200/B200 COCKPIT REFERENCE GUIDE REV. A, OCT, 2008

[. . . ] G1000 ® Integrated Flight Deck Cockpit Reference Guide for the Beechcraft 200/B200 Series System Software 0985. 00 or later Flight instruments nav/Com/transponder/audio panel automatiC Flight Control system gps navigation Flight planning proCedures hazard avoidanCe additional Features annunCiations & alerts appendix index Copyright © 2008 Garmin Ltd. All rights reserved. This manual reflects the operation of System Software version 0985. 00 or later for the Beechcraft 200 and B200. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. [. . . ] Turn either FMS Knob to highlight the desired approach. A list of available transitions for the selected approach procedure is now displayed. Turn either FMS Knob to select the desired transition. The "Vectors" option assumes vectors will be received to the final course segment of the approach and will provide navigation guidance relative to the final approach course. Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-00929-00 Rev. A Index Appendix Annun/Alerts 32 procedures 7) 8) Press the ENT Key. If desired, the DA/MDA for the selected approach procedure may be entered and displayed on the PFD. Turn the small FMS Knob in the direction of the green arrow to change the display from OFF to BARO. Turn the small FMS Knob to enter the published DA/MDA for the selected approach procedure. Flight Instruments Nav/Com/ XPDR/Audio 9) 10) Press the ENT Key. or ACTIVATE?' is now displayed with `LOAD?' highlighted. 11) Turn the large FMS Knob to select either `LOAD?' or `ACTIVATE?'. Selecting `LOAD?' enters the selected approach procedure into the active flight plan, but is not currently active. Selecting `ACTIVATE?' enters the selected approach procedure into the active flight plan and is immediately activated. 12) Press the ENT Key. AFCS GPS Nav Flight Planning aCtivate an approaCh in the aCtive Flight plan 1) 2) 3) Press the PROC Key. Turn the large FMS Knob to highlight `ACTIVATE APPROACH'. Press the ENT Key. Procedures Hazard Avoidance aCtivate a veCtor to Final approaCh Fix 1) 2) 3) 4) Press the PROC Key. Turn the large FMS Knob to highlight `ACTIVATE VECTOR-TO-FINAL'. The final approach course becomes the active leg. Additional Features Annun/Alerts aCtivate a missed approaCh in the aCtive Flight plan 1) 2) 3) 4) Press the PROC Key. Turn the large FMS Knob to highlight `ACTIVATE MISSED APPROACH'. A confirmation window will be displayed. With `ACTIVATE' highlighted, press the ENT Key. Or: Press the go-around button. 190-00929-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series Appendix Index 33 Index Appendix Annun/Alerts Additional Features Procedures GPS Nav AFCS Hazard Avoidance Flight Planning Nav/Com/ XPDR/Audio Flight Instruments procedures 34 Blank Page Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-00929-00 Rev. [. . . ] A appendix appendix pFd soFtkey map ALERTS Flight Instruments Nav/Com/ XPDR/Audio AFCS GPS Nav Top Level PFD Softkeys ALERTS Flight Planning Procedures STRMSCP ALERTS Select the BACK Softkey to return to the top-level softkeys. Hazard Avoidance Inset Map Softkeys INSET OFF DCLTR (3) Displays Inset Map in PFD lower left corner Removes Inset Map Selects desired amount of map detail; cycles through declutter levels: DCLTR (No Declutter): All map features visible DCLTR-1: Declutters land data DCLTR-2: Declutters land and SUA data DCLTR-3: Removes everything except the active flight plan Additional Features Annun/Alerts Appendix Index 190-00929-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series 75 appendix Flight Instruments TRAFFIC TOPO Displays traffic information on Inset Map Displays topographical data (e. g. , coastlines, terrain, rivers, lakes) and elevation scale on Inset Map Displays terrain information on Inset Map Press to display the Stormscope lightning data on the Inset Map (within a 200 nm radius of the aircraft) Displays NEXRAD weather and coverage information on Inset Map (optional feature) Displays XM lightning information on Inset Map (optional feature) ALERTS Nav/Com/ XPDR/Audio TERRAIN STRMSCP AFCS NEXRAD GPS Nav XM LTNG Flight Planning Procedures ADC1 ADC2 AHRS1 AHRS2 BACK ALERTS Select the BACK Softkey to return to the top level softkeys. Hazard Avoidance Sensor Softkeys SENSOR Displays softkeys for selecting the #1 and #2 AhRS and Air Data Computers Selects the #1 Air Data Computer Selects the #2 Air Data Computer Selects the #1 AhRS Selects the #2 AhRS Additional Features ADC1 ADC2 AHRS1 AHRS2 Index Appendix Annun/Alerts 76 Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-00929-00 Rev. A appendix DME ALERTS Flight Instruments SYN VIS HSI FMT ALT UNIT ALERTS Nav/Com/ XPDR/Audio AFCS Select the BACK Softkey to return to the top-level softkeys 360 HSI ARC HSI BACK ALERTS GPS Nav METERS IN HPA ALERTS ALERTS Flight Planning PATHWAY SYN TERR HRZN HDG APTSIGNS ALERTS Procedures PFD Configuration Softkeys PFD SYN VIS PATHWAY Displays second-level softkeys for additional PFD configurations Displays the softkeys for enabling or disabling Synthetic Vision features Displays rectangular boxes representing the horizontal and vertical flight path of the active flight plan Enables synthetic terrain depiction Hazard Avoidance Additional Features Annun/Alerts SYN TERR HRZN HDG Displays compass heading along the Zero-Pitch line APTSIGNS Displays position markers for airports within approximately 15 nm of the current aircraft position. Airport identifiers are displayed when the airport is within approximately 9 nm. 77 Appendix Index 190-00929-00 Rev. [. . . ]