User manual GARMIN GDU 620 COCKPIT REFERENCE GUIDE REV. A, JUN, 2008

[. . . ] G600 Cockpit Reference Guide © 2008 Garmin Ltd. This manual reflects the operation of System Software version 2. 00, or later. Some differences in operation may be observed when comparing the information in this manual to later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. [. . . ] 1) Set your navigation source and HSI to the desired course. 2) Engage your autopilot in navigation mode. 3) Control your autopilot navigation through the navigation source and the HSI. 4) When GPSS mode is desired, activate GPSS on autopilot. PRIMARY FLIGHT DISPLAY 190-00601-03 Rev A G600 Cockpit Reference Guide 13 PRIMARY FLIGHT DISPLAY (PFD) Autopilot Operation with the GDU 620 Emulating GPSS NOTE: The GDU 620 has the ability to emulate GPSS roll steering for autopilots that do not support GPSS. The GDU 620 emulates GPSS by sending headings to the autopilot that guide turn anticipation. 1) Select GPS navigation on the HSI. 2) Set the HSI to the desired course (if in OBS mode). 3) Set the external Autopilot Heading Datum switch to GPSS. Heading Bug Inactive Indication PRIMARY FLIGHT DISPLAY GPSS Emulation Indication 4) Engage your autopilot in HDG mode. NOTE: With GPSS engaged and in HDG mode, the heading bug will not control your autopilot heading. This is annunciated next to the HSI by the GPSS annunciation. The heading bug may still be used for reference but the autopilot will not control the aircraft on the heading bug. 14 G600 Cockpit Reference Guide 190-00601-03 Rev A MULTI-FUNCTION DISPLAY (MFD) Multi-Function Display (MFD) MULTI-FUNCTION DISPLAY 7 6 5 4 1 Multi-Function Display (MFD) 1 2 3 4 5 6 7 Soft Keys 2 3 Large MFD Knob: Use to move between page groups. Small MFD Knob: Use to move within page groups. Enter: Validates or confirms a menu selection or data entry. Clear: Press and hold to return to Navigation Map 1. Menu: Erases information, cancels entries, or removes page menus. Pressing and holding the CLR key displays the first page of the Map Group. Range Select: Changes the range on the map pages. Up arrow zooms out, down arrow zooms in. Also aids in scrolling up and down text pages. 190-00601-03 Rev A G600 Cockpit Reference Guide 15 MULTI-FUNCTION DISPLAY (MFD) Page Navigation - Moving Between Pages Page Group Turn Large MFD knob Page Turn Small MFD knob 1) Turn the large MFD knob to move between page groups. 2) Turn the small MFD knob to change pages within the page group. NOTE: Page Group and Page are shown at the bottom of the MFD. MULTI-FUNCTION DISPLAY Changing Settings within a Page 1) Press the MENU key and make the necessary adjustments with the large MFD knob and small MFD knobs. 2) Press the small MFD knob to activate editing. 3) Turn the large MFD knob to select the desired item. 4) Turn the small MFD knob to change the highlighted value. 6) Press the small MFD knob to cancel selection or exit the editing mode. Default Map Page Press and hold the CLR key to return to the first page of the MAP group. 16 G600 Cockpit Reference Guide 190-00601-03 Rev A MAP GROUP Map Group Navigation Map 1 and Navigation Map 2 Pages Soft Keys Found on Navigation Map Pages MAP GROUP: NAV PAGES Moving the Map Pointer Around the Map (Panning) NOTE: Panning can be used in Terrain pages to view elevation levels. 1) While viewing Navigation Map 1 or Navigation Map 2 of the Map Page Group, press the small MFD knob. [. . . ] The ChartView database is updated on a 14-day cycle. If the ChartView database is not updated within 70 days of the expiration date, ChartView will no longer function. FPL GROUP: CHARTS PAGE 42 G600 Cockpit Reference Guide 190-00601-03 Rev A ALERTS Alerts NOTE: Contact your Garmin dealer for service if any of the following alerts appear. Alert ADC1 ALT EC ADC1 AS EC AHRS1 GPS AHRS1 SRVC AHRS1 TAS CAL LOST CNFG MISMATCH CNFG MODULE DATA LOST FAN 1 FAIL FAN 2 FAIL GEO LIMITS GPS1 FAIL GPS2 FAIL GPS2 FPL USED GPS(1/2) PPS HDG FAULT <LRU> CONFIG <LRU> COOLING <LRU> DB ERR <LRU> SERVICE <LRU> VOLTAGE Description ADC1 altitude error correction is unavailable. ADC1 airspeed error correction is unavailable. AHRS not receiving any GPS or is operating exclusively in no-GPS mode. [. . . ]