User manual GARMIN GMS 10 NETWORK PORT EXPANDER

[. . . ] If you select a mounting location that prevents you from using the Expander's factory-drilled holes, use the brackets included in the optional mounting kit. (Instructions are included in the mounting kit. ) Connecting the cable to the network port 1. Unscrew the weather cap from a network port by turning the cap counterclockwise. Connect the network cable to the network port by aligning the cable head with the opening of the network port. [. . . ] A FLASHING light indicates network activity. · DUP/COL: ON means the attached device is operating at full network capacity. OFF or a FLASHING light means the attached device is operating at half capacity. · 100: ON means the network port is running at 100 megabits per second. OFF means it is running at 10 megabits per second. FCC Compliance The GMS10 Network Port Expander complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than "outdoor" requirements. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; consult your Garmin dealer or an experienced radio/TV technician for help. The GMS10 Network Port Expander does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is being provided in accordance with California's Proposition 65. If you have any questions or would like additional information, please refer to our Web site at www. garmin. com/prop65. Specifications Case: Fully gasketed, high-impact plastic alloy Waterproof: to IEC 60529, level IPX7 (submerged to 1 meter for 30 minutes) Size: 3. 5" W x 2. 3" H x 11. 8" D (89. 0 x 57. 2 x 300. 8 mm) Weight: 1. 2 lbs Temperature Range: +5°F to 158°F (-15C to 70C) Source: 10 to 35 Vdc Usage: 2. 75 watts maximum Fuse: AGC/3AG 2. 0 amp Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. [. . . ] Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction. This device has no service-usable parts and is fastened shut with screws. [. . . ]