User manual GARMIN GNS 530

[. . . ] GNS 530 GNS 530A Pilot's Guide & Reference This manual reflects the operation of Main System Software version 4. 0 or above. Some differences in operation may be observed when comparing the information in this manual to earlier software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062 U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin (Europe) Ltd. , Unit 5, The Quadrangle, Abbey Park, Romsey, Hampshire S051 9DL, U. K. [. . . ] To scroll through the available approaches and transitions: 1. Press the small right knob to activate the cursor. Rotate the large right knob to place the cursor on the APPROACH procedure name field. Rotate the small right knob to display a window of available approaches for the selected airport. Continue rotating the small right knob to select the desired approach. The cursor moves to the transitions (TRANS) field. Rotate the small right knob to display a window of available transitions. Continue rotating the small right knob to select the desired transition or select "VECTORS" for guidance only along the final course segment of the approach. STEP 5: With the cursor on the "TRANS" field, rotate the small right knob to select the desired transition. Select "VECTORS" for guidance only along the final course segment of the approach. To remove the flashing cursor, press the small right knob. 6 - wpt pages NOTE: Not all approaches in the database are approved for GPS use. As you select an approach, a "GPS" designation to the right of the procedure name indicates the procedure can be flown using the GPS receiver. Some procedures do not have this designation, meaning the GPS receiver may be used for supplemental navigation guidance only. ILS approaches, for example, must be flown by tuning the VLOC receiver to the proper frequency and coupling the VLOC receiver to the external CDI (or HSI). Airport Approach Page Options Airport Approach Options The following options are available for the Airport Approach Page, by pressing the MENU key: Load into Active FPL?allows you to load the selected approach into the active flight plan -- without activating it. This performs the same operation as selecting "Load?" from the Procedures Page "Select Approach?" option. To load an approach from the Airport Approach Page: 1. Select the desired approach and transition using the steps outlined on page 96. Press MENU to display the Airport Approach Page Options. Rotate the large right knob to highlight "Load into Active FPL?" and press ENT. Press FPL to return to the Airport Approach Page. STEP 2 & 3: From the Airport Approach Page, press MENU to display an options list. Select "Load into Active FPL?" to load the approach for later use. Load and Activate? [. . . ] 156 Vertical speed required (VSR) . . . . . . . . . . . . . . . . . . 29, 173 VLOC flip-flop key. . . . . . . . . 1, 14, 87, 118, 126-128 VLOC frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 125 VLOC tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 VLOC volume knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]