User manual GARMIN GPS 12

[. . . ] ?? Personal Navigator Owner's Manual & Reference GPS 12 ® ? TM Software Version 4. 52 or above © 1999 GARMIN Corporation GARMIN International, Inc. , 1200 E. 151st Street, Olathe, Kansas66062 USA Tel: 913-397-8200 or 800-800-1020 Fax: 913-397-8282 GARMIN (Europe) Ltd. , Unit 5, The Quadrangle, Abbey Park, Romsey, Hampshire SO51 9AQ UK Tel: 011-44-1794-519944 Fax: 011-44-1794-519222 GARMIN (Asia) Corp. , 3rd Fl. , No. 1, Lane 45, Pao-Hsing Road, Hsin Tien, Taipei, Taiwan R. O. C. [. . . ] Enter the route number to be activated, and press E. Highlight `ACT?', and press E. To activate a route, highlight the `ACT?' prompt and press ENTER. To activate a route in inverted order: 1. Follow the steps above, but select `INV?', and press E. 28 Active Route Page Once a route has been activated, the active route page will display the waypoint sequence of your route with the estimated time enroute (ETE) at your present speed and the distance to each waypoint. As long as you are navigating an active route, the active route page will become part of the main page sequence of the unit. The active route page will also allow you to change the `ETE' field to display desired track (DTK) or estimated time of arrival (ETA) for each leg. You can also clear or invert the active route. To display DTK or ETA for each leg: 1. Select `DTK' or `ETA', and press E. REFERENCE Active Route, Copying, & Clearing The active route page also allows you to clear (stop navigating) or invert the active route without using the route definition page. To invert a route from the active route page: 1. Active Route Page Whenever you have an active route, the active route page will appear in the primary page sequence after the Compass/Highway Page. To stop route navigation: 2. Highlight `CLR?', and press E. To reactivate the route navigation: 3. Highlight `ACT?', and press E . Copying and Clearing Routes The route definition page is also used to copy a route to another route number. This feature is useful when you make changes to the active route (or create a TracBack route) and want to save the route in its modified form for future use. To copy a route: 1. Highlight the route number field, and press E . Select the route number to be copied, and press E. Highlight the `COPY TO' field, and press E. Scroll through the available routes and select a destination route number. (Only open routes will be available. ) Press E to copy the route. To copy a route, select an open storage route in the `Copy To' field and press ENTER. Only empty storage route numbers will be offered in the `Copy To' field. To clear a route from memory: 1. Highlight the route number field, and press E. Select the desired route number, and press E . E. Select `CLR?', and press 29 REFERENCE Editing Routes A route can be edited any time after its creation. Editing Routes & On-Route GOTO's To edit a route from the active route page or the route definition page: 1. Select the waypoint you want to edit, and press E . Use the on-screen menu to select the desired editing function. [. . . ] . 29 Clearing Track Log . 11, 24, 40 Compass Page . 7, 10, 31, 33 Configuring the Map . . 31, 34 APPENDIX E Index I I/O format . . 44-45 APPENDIX E Index S Satellite Page . . 22 Screen Backlighting 11, 14, 43 Screen Contrast . [. . . ]