User manual GARMIN GPS 12 MAP

[. . . ] GPS 12 MAP owner's manual and reference guide APPENThis manual is This manual is written for operating Software Version 1. 0 or above, and is not suitable for earlier softwareoperating written for versions. Software Version 2. 0 or above, and is not GARMIN International 1200 E. 151st Street, Olathe, Kansas 66062 U. S. A. suitable for earlier Tel: 913/397. 8200 Fax: 913/397. 8282 software versions. [. . . ] Use the rocker keypad to move the arrow to the desired map position. You may also need to use the IN and OUT zoom keys, in conjunction with the rocker keypad, to speed up this process. Press ENTER to capture the arrow position and display the New Waypoint Page. (If the arrow is placed on a highway exit, the exit services pages will appear instead. To create a waypoint at a highway exit location, see page 34. ) Waypoints can be created directly from the Map Page, by placing the panning arrow on the desired position and pressing ENTER. 4. To change the waypoint name (a three-digit number is automatically assigned), highlight the waypoint name field and press ENTER. Use the rocker keypad to enter the new waypoint name and press ENTER when finished. To save the waypoint in memory, highlight `Done' and press ENTER. Creating Waypoints by Text Entry Waypoints may be created by manually entering the position coordinates or by entering the bearing and distance from an existing waypoint (or present position). To create a new waypoint by manually entering its coordinates, or by bearing/ distance from another position: User waypoints can also be created by entering the position coordinates for the waypoint. Press the MENU key twice to select the Main Menu. Highlight `Waypoints' and press ENTER. A list of all waypoints stored in memory is displayed. Press MENU to display the Waypoint List Options. Highlight `New Waypoint' and press ENTER. To enter a name for the new waypoint, highlight the waypoint name field and press ENTER. Use the rocker keypad to enter the waypoint name and press ENTER when finished. To enter position coordinates for the new waypoint, highlight the waypoint coordinates field and press ENTER. Use the rocker keypad to enter the position coordinates and press ENTER when finished. (For lat/long coordinates, enter both the latitude and longitude information before pressing ENTER. ) OR, 7. To create the new waypoint by referencing another position, highlight the reference waypoint name field and press ENTER. Use the rocker keypad to enter the name of the reference waypoint and press ENTER. (If the reference waypoint name field is left blank, your present position will be used as the reference position. ) Use the same procedure to enter the bearing (BRG) and distance (DIST) from the reference waypoint to the new waypoint. [. . . ] 44 T Time Format . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 76 Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 75 TracBack Navigation51, 54-55, 68 Track Compass . . . . . . . . . . . . . . . . . . . 54-55, 68-69 Clearing Active . . . . . . . . . . . . . . . . . [. . . ]