User manual GARMIN GPS 17N WAAS ENABLE GPS SENSOR DECLARTION OF CONFORMITY REV. A, JAN, 2002

[. . . ] When all of the parameters are properly entered, the `Compute' field will start flashing. The unit will start to predict the RAIM availability over the entire route, and the flashing `Compute' field will switch to `WAIT ->', with the arrow sign continually rotating, indicating that the prediction is in progress. 1. From the Route Catalog Page (Figure 1), select the desired route for RAIM prediction (if the route is empty, enter the route first). [. . . ] From the Route Catalog Page (Figure 1), select the desired route for RAIM prediction (if the route is empty, enter the route first). Highlight the route action field, select `RAIM prd' and press ENTER. The Route RAIM Prediction Page will be displayed (Figure 2). 2. Highlight and enter depart time, depart date, enroute altitude, and enroute ground speed. NOTE You may also enter the satellite ID number in the `rem sat' field for any satellite (1-32) which has been notamed as "out of service" during the flight, to exclude that particular satellite from participating in predicting the Route RAIM availability. If nothing is entered in the `rem sat' field, the unit assumes all satellites are usable. Route RAIM Prediction Page GPS 155/165 PILOT'S GUIDE ADDENDUM Figure 1. GARMIN GPS 155/165 software (all versions): The GARMIN GPS 155/165 software versions 3. 07 and higher incorporate a change which removes the Route Settings Page which allowed Automatic Leg Selection and Automatic Leg Sequencing to be enabled/disabled by the pilot. An ``unkn" (unknown) approach type is displayed on the Approach Select Page when the unit software does not know how to display a new approach type in the database. Press S and rotate O until the I/O setup page is displayed. Use K to select `off' or `plotting' for output to an RS-232 device. Rotate O to advance the cursor to the baud rate field. Use K to select the desired baud rate (300, 1200, 2400, 4800, 9600). 79, Pilot's Guide) The GARMIN GPS 155/165 software versions 3. 07 and higher incorporate a change which allows the pilot to select a SID from the nearest airport when the active route does not have a departure airport as the first waypoint. 7. 59, Pilot's Guide) The GARMIN GPS 155/165 software versions 3. 07 and higher incorporate a change which retains a direct-to waypoint as an off-route direct-to waypoint if a SID/STAR/Approach procedure waypoint is the active direct-to-waypoint when the procedure is deleted and only the airport associated with the procedure remains in the active route. 3 R0@4V??Y0@4VeY0@4V?eY0@?@4V @&W?@??@&W?@f?Y7??@e=3 @S?<7??1S?<7fM. W??1B?<7 X6@2W??X6@2We?@2We?X6@2W ?@g@?eY0@4V?hY04Ve?'R04VeY0@4V??Y&WehL@J?f?X3??@e?@e@?e@??@eU*e@?e@??. O?=3h?5C?=3f?Y. ?eL@J? [. . . ] @4V @&W?@??@&W?@f?Y7??@e=3 @S?<7??1S?<7fM. W??1B?<7 X6@2W??X6@2We?@2We?X6@2W ?@g@?eY0@4V?hY04Ve?'R04VeY0@4V??Y&WehL@J?f?X3??@e?@e@?e@??@eU*e@?e@??. O?=3h?5C?=3f?Y. ?eL@J?@2We@??H@?f?@h?@e?@fY. W?e?@ ?Y. Wfh?@f1V?Y7??1BM(@e1BM(@??1V?f1BM(@?f?@h?@e?@e?Y. Wf?@ ?5J?fh?@fX6@2W??X62T)eX62T)??X6 [. . . ]