User manual GARMIN GPS 95AVD

[. . . ] GPS 95 AVD PERSONAL NAVIGATORTM OWNER'S MANUAL KOJC FUROR KLNK PWR STAT GO TO AUTO STO ABC 1 JKL 4 STU 7 DEF 2 MNO 5 VWX 8 GHI 3 PQR 6 YZ9 NAV GC WPT RTE LNK CLR 0 ENT KGCK SM GPS 95 AVD Personal Navigator TM OWNER'S MANUAL © 1993 GARMIN, 9875 Widmer Road, Lenexa, KS Printed in Taiwan. 66215, USA All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of GARMIN. Information in this document is subject to change without notice. GARMIN reserves the right to change or improve their products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. June, 1993 190-00050-00 Rev. [. . . ] The Route List Page displays the route numbers (far left), beginning waypoint, and final destination waypoint. You may also activate or delete a route from the Route List Page. · Highlight the route you wish to activate with the arrow keys. The Route Definition Page is displayed with the ">Activate?" action highlighted. · Press ENT to Activate the route. · Highlight the route you wish to delete using the arrow keys. The Route Definition Page is displayed with the ">Clear?" action highlighted. 6-6 CHAPTER 7 AUTOSTORETM The AutostoreTM function allows you to capture your position at the touch of a button for future reference. This function saves your current position as a waypoint. Additionally, you may record your navigation path by inserting the captured waypoints directly into a route. The AutostoreTM Page displays the waypoint identifier, captured position and optional storage route. An AutostoreTM waypoint name is pre-assigned as a three digit number. You may change this to any name you desire. AutostoreTM waypoints may be used for any waypoint operation and will be part of the 500 available waypoints. 7. 1 CREATING WAYPOINTS WITH AUTOSTORETM Waypoint Identifier Captured Position Route Storage Number 7-1 You may capture and save your position as a waypoint, without adding it to a route, by leaving the route storage number field blank. The pre-assigned waypoint identifier and captured position are displayed. (NOTE: The AutostoreTM location is captured as soon as you press AUTOSTO. This allows you all the time you need to change the waypoint name and/or confirm the AutostoreTM operation. ) · If you wish to assign a different identifier to the waypoint: move the cursor to the waypoint name field, enter the name of your choice and press ENT. If you enter a waypoint name already used, you will be informed with the message, "WPT Exists _____" (where the blank will be filled in with the waypoint identifier). Enter a different identifier if this occurs. · Press ENT on a blank route storage number field to save the waypoint. (If the route storage number field is not blank, the waypoint will be added to the route shown. ) 7. 2 BUILDING ROUTES WITH AUTOSTORETM The GPS 95's AutostoreTM feature may also be used to build a route as you are flying. During your flight; as you reach each airport, NAVAID, landmark, or turn to a new heading; you may capture your position and add it to a route. [. . . ] (The unit contains no user serviceable parts. Do not attempt repairs yourself. ) Never allow gasoline or solvents to come into contact with your unit. Damage to the case may occur which is not covered by your warranty. The waypoints, routes, custom settings and other data stored in the GPS 95 are maintained by an internal battery. [. . . ]