User manual GARMIN GPSMAP 168 SOUNDER

[. . . ] GPSMAP 168 Sounder chartplotting receiver & depth-finder owner's manual and reference guide © Copyright 2000-2002 GARMIN Ltd. or its subsidiaries All Rights Reserved Software Version 3. 03 or above Internal Database Version 2. 00 GARMIN International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 GARMIN (Europe) Ltd. [. . . ] Press and quickly release the ENTER/MARK key. The `New Map Waypoint' page appears. (NOTE: Pressing and holding the ENTER/MARK key will mark your current location instead of the cursor location, and bring up the `New Waypoint' page) If you are using a map item to create a waypoint, an information page(s) for the map item will appear first. Use the ARROW KEYPAD to highlight `Create Waypt' and press ENTER/MARK. The `New Waypoint' page will now appear. To accept the waypoint with the default name and symbol, press ENTER/MARK. If you are creating a waypoint from an on-screen map item, the name and symbol will automatically reflect the selected map item's name and symbol. To change the name, symbol or enter a depth, highlight the appropriate field and press ENTER/ MARK. Make your changes and press ENTER/MARK when done. After entering and confirming your changes, highlight `OK' and press ENTER/MARK. Choose `Create Waypt' to use a map item for a new waypoint. Map waypoint from non-map item. 49 Creating Waypoints By Text Entry Reference Creating and Editing Waypoints Waypoints may also be created by manually entering position coordinates through the `Waypt' tab on the main menu page. To create a new waypoint by manually entering its coordinates: 1. Press MENU twice to display the main menu page. Highlight the `Waypt' tab and press MENU. Then highlight `New Waypoint' and press ENTER/ MARK. The New Waypoint page will appear, with the next available waypoint number and the receiver's last known position as the default name and position. Use the ARROW KEYPAD to highlight the position coordinates field and press ENTER/MARK. Press UP or DOWN on ARROW KEYPAD to change the digits, and press RIGHT or LEFT to move to the next number position. Press RIGHT at the end of the top line to move to the bottom line. If you want to change the waypoint name, symbol or enter a depth, highlight the desired field and press ENTER/MARK. Use the ARROW KEYPAD to enter the new information and press ENTER/MARK after the last character in each section. Symbol Coordinates Name Depth New Waypoint Page 5. When you have finished, highlight `OK' and press ENTER/MARK. Reviewing and Editing Waypoints Map Feature Info Tab Once you have created and stored a waypoint, it may be reviewed, modified, moved or deleted at any time through the Waypoint Review and Waypoint Edit pages. On the Waypoint Review page, you may change the name, symbol, position coordinates, or depth for the selected waypoint, show the waypoint on the map or delete the waypoint. [. . . ] The unit uses the whiteline function to make this bottom layer information easier to distinguish. When viewing the display without Whiteline active, the bottom return is black. While you can make some determination of the bottom type, the black return makes this more difficult. With the whiteline active, the bottom return appears layered in shades of gray and black and makes determining the bottom type easier and more reliable. [. . . ]