User manual GARMIN GPSMAP 188 SOUNDER

[. . . ] GPSMAP 188/188C Sounder ® chartplotting receiver owner's manual (GPSMAP 188C shown) © Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] To select a waypoint from the list, use the ROCKER to highlight a waypoint from the User or Nearest tab. Or To select a waypoint from the map, highlight either the User or Nearest tab, and press MENU. With Select From Map highlighted, press ENTER. Use the zoom In and Out keys and the ROCKER to highlight a waypoint. Press ENTER to begin entry of the proximity radius. Use the ROCKER to enter a distance value (to 99. 99 units) and press ENTER. Proximity Waypoint Proximity Circle A dashed circle appears showing the alert boundary for the proximity waypoints. To add a proximity waypoint: 1. Use the ROCKER to highlight the field below Proximity Alarm, and press ENTER. Select a ON or OFF setting, and press ENTER. To turn on or off proximity alarms: To display the waypoint menu options: Using the ROCKER, highlight the Proximity tab, and press MENU. 1. Use the ROCKER to highlight the proximity waypoint, and press MENU. To clear a single alarm, highlight Delete Alarm, and press ENTER. To clear all proximity waypoints, select the Delete All option, and press ENTER. Use the ROCKER to highlight OK, and press ENTER. To clear one or all proximity waypoint(s) from the list: The following options are available from the Proximity sub tab of the Points tab: · Delete Alarm--removes a selected waypoint from proximity list. · Delete All--removes all waypoints from proximity list. 52 GPSMAP 188/188C Sounder Owner's Manual MAIN MENU > ROUTES TAB The Route List Page displays all the routes currently stored in memory, along with a descriptive name for each route. After a route has been created, it can be activated and used for navigation with the NAV key. A route can be followed in the same sequence as it was originally created, or you can invert the route and navigate from the end waypoint back to the beginning waypoint. From the Route list menu, you can choose New Route (page 17), Copy Route, Delete Route, or Delete All. From any page, press NAV, highlight Follow Route, and press ENTER. If you highlight a route from the Route List or Route Review Page, and press NAV the window automatically displays Follow <the route name>. Highlight the route you want to navigate, and press ENTER. Choose Activate or Invert and Activate, and press ENTER. Invert and Activate reverses the route, then starts. Routes Tab If you highlight a route name from the Route List and press NAV, the name automatically appears. To stop navigation of a route: To copy or delete a route: Press NAV, highlight Stop Navigation, and press ENTER. 1. From the Route List, highlight the route you want to copy or delete using the ROCKER, and press MENU. [. . . ] Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular GPSMAP 188/188C Sounder Owner's Manual 113 APPENDIX > SAFETY INFORMATION Safety Information CAUTION: Use the GPSMAP 188/188C Sounder at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner's Manual--and thoroughly practice operation using Simulator Mode prior to actual use. [. . . ]