User manual GARMIN GPSMAP 210

[. . . ] Garmin Corporation Unit 5, The Quadrangle, Abbey Park Industrial Estate, No. 68, Jangshu 2nd Road, Shijr, Taipei County, Romsey, SO51 9DL, U. K. 886/2. 2642. 9199 Fax 44/0870. 8501251 Fax 886/2. 2642. 9099 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. [. . . ] Move the map pointer to the new map location, and press ENTER. To edit a route point: To remove a route waypoint: To move a route waypoint: Highlight a point, and press ENTER to review it. 54 GPSMAP 392/398/492/498 Owner's Manual MAIN MENU > ROUTES TAB 1. Select the first (to add waypoints to the beginning of the route) or last (to add waypoints to the end of the route) route waypoint with the map pointer, and press ADJ/MENU. Highlight the Add option, and press ENTER. Move the map pointer to the new point or location, and press ENTER. Repeat step 3 to insert additional waypoints, or press QUIT to finish. To add turns at the beginning or end of the route: Add Before--inserts a waypoint into the list of route points or add a point(s) onto the end of the route. To insert a point into the route, or add a point to the end of the route: Route edit mode also allows you to insert a new route waypoint in any route leg using the map pointer. To insert a new waypoint between two existing route waypoints: 1. Use the ROCKER to select the leg you want to insert the new waypoint in, and press ENTER. Move the map pointer to the new map location, existing waypoint, or map item (ADD is shown below the arrow and the route lines move with the arrow), and press ENTER. 1. From either the Route Review or Active Route Pages, use the ROCKER to highlight the point you want to insert the new point before (to add a point to the end, highlight the blank field at the bottom of the list), and press ADJ/MENU. From the Find menu, highlight Waypoints, and press ENTER. · Time--records track plot based on a user-defined time interval. · Resolution--records track plot based on a user-defined variance from your course over ground. The resolution option is the default setting and is recommended for the most efficient use of memory and TracBack performance. The distance value (entered in the value field) is the maximum error allowed from the true course before recording a track point. 58 · Value--defines the distance or time used to record the track log. · Save--saves the current active track log. · Clear--erases the active track log stored in memory. For the Saved tab, the following menu options are available: · Delete Track--deletes highlighted saved track log from memory. · Delete All--deletes all saved track logs from memory. GPSMAP 392/398/492/498 Owner's Manual MAIN MENU > DSC AND CARD TAB DSC Tab DSC uses marine VHF radio and GPS technologies to transmit and receive location information. DSC is used by mariners for two major operation: distress calls and position reporting. See page 21 and the "Appendix" for more information on DSC and using it with your GPSMAP 392/398/492/498. Card Tab The Card tab contains options for saving waypoints, routes and tracks to a data card. When data is saved to a data card, it can be exchanged with other compatible units and Garmin's MapSource software program on your PC. 1. [. . . ] Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL U. K. 44/0870. 8501241 Fax 44/0870. 8501251 Online Auction Purchases: Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. [. . . ]