User manual GARMIN GPSMAP 376C

[. . . ] chartplotting receiver GPSMAP 376C ® owner's manual © Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] As you navigate a route, the turn list automatically updates to indicate the next turn at the top of the list. Next Turn Page Current Route Page You can save the current route from the Current Route Page. Press ENTER when Save Route is highlighted. Your route is automatically saved, using the starting point and destination as the route name. Press ENTER when OK is highlighted to complete saving the route. Saving the Current Route You can scroll through the entire list by moving the scroll bar up or down. Highlight any of the turns on the list and press ENTER to view the Next Turn Page for that turn. The Current Route and Next Turn Page display similar information using a different layout. The Next Turn Page shows your next turn on a map. 66 GPSMAP 376C Owner's Manual AUTOMOTIVE MODE PAGES AND FEATURES > TRIP COMPUTER PAGE Trip Computer Page The Trip Computer Page shows important data while navigating a route in Automotive Mode. It indicates your current speed and other helpful data about your trip, such as average speed and moving time. Trip Computer Page Options Menu Trip Computer Page Reset the Trip Computer before beginning a trip. If you make frequent stops, leave the GPSMAP 376C turned on in order to receive satellites. This allows the unit to accurately measure elapsed time during the trip. Set Up Page Layout--allows you to choose the layout and number of data fields. You can change the layout of the Trip Computer to the Dashboard layout while still in Automotive Mode. You can also then change the data fields on the Dashboard to be more useful while in Automotive Mode. Change Nearest Type--allows you to specify the type of item to be used as the nearest item [shown in the lower-left data field of the Position Data (2 Columns) layout]. The choices change based on the current Usage Mode. Select the Reset options to reset the maximum speed, the odometer, everything but the max speed and odometer, or reset everything in the trip computer. 67 Trip Computer Page Options Menu The following options are available from the Trip Computer options menu. Some options are only available if you have changed the page layout. Highlight an option, and press ENTER. GPSMAP 376C Owner's Manual MAIN MENU > GPS TAB MAIN MENU The GPSMAP 376C's Main Menu provides access to various waypoint, system, navigation and interface management, and setup menus. The Main Menu is accessible from any page by pressing the MENU key twice. GPS Tab The GPS tab provides a visual reference of satellite acquisition, receiver status, and accuracy. The sky view and signal strength bars give an indication of what satellites are visible to the receiver and whether they are being tracked. For more information about GPS, see pages 4-6. Main Menu Main Menu--GPS Tab 1. From any page, press MENU twice to open the Main Menu. Press up or down on the ROCKER to highlight the tab you want. [. . . ] Subscriptions subject to Customer Agreement included with the XM Welcome Kit and available at xmradio. com. Available only in the 48 contiguous United States. XM WX is a trademark of XM Satellite Radio Inc. 136 GPSMAP 376C Owner's Manual APPENDIX > FCC COMPLIANCE FCC Compliance The GPSMAP 376C complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than "outdoor" requirements. [. . . ]