User manual GARMIN GPSMAP 492

[. . . ] Owner's Manual GPSMAP 392/398 GPSMAP 492/498 chartplotter receiver GPSMAP 498 shown © Copyright 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] (See page 48 for searching for waypoints by name. ) GPSMAP 392/398/492/498 Owner's Manual 55 MAIN MENU > ROUTES TAB To plan your route: Drag the route leg to an existing waypoint (shown), map item, or a blank spot on the map to create a new route point. 1. From the Route Review Page, press ADJ/MENU, highlight Plan, and press ENTER. Use the ROCKER to enter planning data in the Speed, Depart Time, Fuel Flow, and Depart Date fields. Remove--removes a point (waypoint or map item) from a route. This option is available from both the Route Review and Active Route Pages. 1. From either the Route Review or Active Route Pages, use the ROCKER to highlight the point to remove, and press ADJ/MENU. Highlight Remove, and press ENTER. To remove a point from a route: Trip Planning Data Fields Plan--the Route Review and Active Route Pages also show tripplanning information for each leg or the entire route. Available information includes Course, ETA, Fuel (to point), Leg Distance, Leg Fuel, Leg Time, Sunrise and Sunset (at point location), and Time To (point). 56 NOTE: Fuel flow rates on your unit are measured in units per hour. System setting changes for units of measure (statute, nautical, or metric) do not affect the fuel flow measure. You should enter fuel flow rates based on available information for your vehicle's (operator's manual performance specifications) and note of the units of measure (gallons, liters. ) GPSMAP 392/398/492/498 Owner's Manual MAIN MENU > TRACK TAB Use the Track tab to specify whether or not to record a track log, define how it is recorded, or save track log data for future use. The Track Logs Page also provides an indicator of the memory used for the active track log and allows you to clear the track memory. The Track tab is divided in two sub tabs: Active and Saved. Track Tab Saved Sub Tab Active Sub Tab The Saved sub tab shows and manages a list of all saved track logs, allows for TracBack activation, and Map Page of saved logs. The active log stores up to approximately 10, 000 track log points, based on the criteria specified in the Track settings. You can save up to 15 track logs in memory, with up to 750 track log points in each saved log. A TracBack can be started from any of the saved tracks on this tab. The Active sub tab is for the active log (the log currently being recorded). It shows track memory used and current settings. Refer to page 58. Active Track Tab GPSMAP 392/398/492/498 Owner's Manual 57 MAIN MENU > TRACK TAB For the Active tab, the following settings are available: · Record Mode--contains three track recording options: · Off--no track log is recorded. If you select Off, you cannot use the TracBack feature. · Fill--a track log is recorded until the track memory is full. · Wrap--a track log is continuously recorded, wrapping through the available memory (replacing the oldest track data with new data). · Interval--defines the frequency at which the track plots are recorded. Three interval settings are available: · Distance--records track based on a user-defined distance between points. · Time--records track plot based on a user-defined time interval. [. . . ] Garmin will not replace missing components from any package purchased through an online auction. International Purchases: A separate warranty is provided by international distributors for units purchased outside the United States. This warranty is provided by the local in-country distributor and this distributor provides local service for your unit. Distributor warranties are only valid in the area of intended distribution. [. . . ]