User manual GARMIN GPSMAP 495

[. . . ] Owner's Manual GPSMAP 495 ® portable aviation receiver © 2008 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397. 8200 or (800) 800. 1020 Fax (913) 397. 8282 Garmin (Europe) Ltd. [. . . ] Highlight Go To <Point Name>, and press ENTER. OR Press ENTER when the waypoint is highlighted to review the waypoint on the Waypoint Page. See the previous pages for detailed information on reviewing and editing waypoints. To access the Points tab: 1. Highlight Points from the vertical list of tabs. Press the ROCKER right or left to highlight User or Proximity to open that sub tab. Automotive You can delete waypoints from the waypoint list in the Points tab or from the Waypoint Pages. To delete a waypoint from the Waypoint Page, use the ROCKER to highlight the on-screen Delete button and press ENTER. NOTE: When you delete a waypoint, you cannot recover it from the unit. Back up important waypoints to a computer using the USB cable and software, such as MapSource, or write the coodinates down by hand. 80 Deleting Waypoints To delete a waypoint from the User sub tab: 1. From the User sub tab, use the ROCKER to highlight the waypoint you want to delete. Press MENU, highlight Delete Waypoint, and press ENTER. Press ENTER to confirm. GPSMAP 495 Owner's Manual Automotive Mode Pages and Features > Editing and Managing Waypoints To delete waypoints by distance: 1. From the User sub tab, highlight the waypoint to be deleted, and press MENU. Highlight Delete By Distance, and press ENTER. Select Less Than or More Than, and ENTER the distance using the ROCKER. You can select a waypoint or point of interest as the From location. Highlight the From field, and press ENTER. From the Find Menu, select the location, and press ENTER. Highlight Delete, and press ENTER to delete all waypoints within the set location. Choose Cancel or press QUIT to stop the deletion. GPSMAP 495 Owner's Manual Proximity Points Tab If a proximity alarm circle overlaps an existing alarm circle, a "Proximity Overlaps Another Proximity Waypoint" message appears. Because the unit only alerts for one of the overlap points, use caution when navigating in these areas. If you enter an alarm circle overlap, you are only alerted to the closest proximity waypoint. 81 Automotive To delete waypoints by symbol or category: 1. From the User sub tab, highlight the waypoint you want to delete, and press MENU. Highlight Delete by Symbol or Delete by Category, and press ENTER. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: · Reorient or relocate the receiving antenna. [. . . ]