User manual GARMIN GPSMAP 192C

[. . . ] chartplotting receiver GPSMAP 192C ® owner's manual © Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] Use the zoom In and Out buttons and the ROCKER to highlight a waypoint. Press ENTER to begin entry of the proximity radius. Use the ROCKER to enter a distance value (to 99. 99 units), and press ENTER. Proximity Waypoint Proximity Circle A dashed circle appears showing the alert boundary for the proximity waypoints. 52 To add a proximity waypoint: 1. Use the ROCKER to highlight the field below Proximity Alarm, and press ENTER. Select the ON or OFF setting, and press ENTER. To turn on or off proximity alarms: To display the waypoint menu options: Using the ROCKER, highlight the Proximity tab, and press MENU. 1. Use the ROCKER to highlight the proximity waypoint, and press MENU. To clear a single alarm, highlight Delete Alarm, and press ENTER. To clear all proximity waypoints, select the Delete All option, and press ENTER. Use the ROCKER to highlight OK, and press ENTER. To clear one or all proximity waypoint(s) from the list: The following options are available from the Proximity submenu of the Points tab: · Delete Alarm--removes selected waypoint from proximity list. · Delete All--removes all waypoints from proximity list. GPSMAP 192C Owner's Manual MAIN MENU > ROUTES TAB Routes Tab The GPSMAP 192C Route List page displays all the routes currently stored in memory, along with a descriptive name for each route. When a route has been created, it can be activated and used for navigation with the NAV key. A route can be followed in the same sequence as it was originally created, or you can invert the route and navigate from the end waypoint back to the beginning waypoint. From the Route list menu, you can choose New Route (page 17), Copy Route, Delete Route, or Delete All. To activate a route with the NAV key: 1. From any page, press NAV, using the ROCKER, highlight Follow Route, and press ENTER. If you highlight a route from the Route List or Route Review page, and press NAV. The window automatically displays, Follow <the route name>. Highlight the route you want to navigate and press ENTER. Choose Activate or Invert and Activate and press ENTER. Invert and Activate reverses the route, then activates. If you highlight a route name from the Route List and press NAV, the name automatically appears. To deactivate (stop navigation) of a route: To copy or delete a route: Press NAV, highlight Stop Navigation, and press ENTER. 1. From the Route List, highlight the route you want to copy or delete using the ROCKER, and press MENU. Choose either Copy Route or Delete Route and press ENTER. [. . . ] Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular GPSMAP 192C Owner's Manual 113 APPENDIX > OPTIONAL ACCESSORIES CAUTION: Use the GPSMAP 192C at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner's Manual--and thoroughly practice operation using Simulator Mode prior to actual use. [. . . ]