User manual GARMIN GPSMAP 4010

[. . . ] GPSMAP® 4000/5000 Series owner's manual © 2008 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397. 8200 or (800) 800. 1020 Fax (913) 397. 8282 Garmin (Europe) Ltd. [. . . ] To view video from the Home screen, select Information > Video. Select Menu to set up the following: · Source--selects the video device (1 or 2) to use to display video. If you have two video sources and want to alternate between the two, select Alternate to define the amount of time each video is displayed. · Aspect--switches between the standard aspect ratio and a stretched aspect ratio. The video cannot be stretched beyond the dimensions provided by the connected video device. Because of this, the stretched video may not fill the entire screen of the GPSMAP 4012/5012. · Brightness--adjusts the brightness of the video feed up or down, or select Auto to allow the unit to automatically adjust the brightness. · Saturation--adjusts the color saturation up or down, or select Auto to allow the unit to automatically adjust the saturation. · Contrast--adjusts the contrast up or down, or select Auto to allow the unit to automatically adjust the contrast. · Standard--selects the video format used by the source (PAL or NTSC). Select Auto to let the unit automatically select the source format. WARNING: Do not attempt to operate or watch video input while operating or navigating your boat. Operating or watching the video input while the boat is moving could cause an accident or collision resulting in property damage, serious injury, or death. VieWinG information 28 GPSMAP® 4000/5000 Series Owner's Manual Configuring the Chartplotter Configuring the Chartplotter Use the Configure screen to configure unit settings. Configuring System Settings To change general system settings from the Home screen, select Configure > System. Simulator--turn Simulator Mode On or Off. (If you set the unit into a Store Demonstration mode during the initial unit setup, this setting is named Demo. ) Language--select the on-screen language. Auto Power Up (GPSMAP 4010 and GPSMAP 5015 only)--turn Auto Power Up On or Off. When On is selected, the chartplotter will automatically turn on whenever power is applied, unless the chartplotter is turned off with the Power Key before power is lost. Beeper/Display--select Beeper to set when the unit makes audible sounds. Select Backlight to brighten or darken the backlight. Select Color Mode to switch between Day Mode and Night Mode. GPS--view GPS satellites, turn WAAS/EGNOS on or off, select the source of GPS signals, and set the speed filter to On, Off, or Auto. The speed filter averages the speed of your boat over a short period of time for smoother speed values. System Information--view system information, restore factory settings, view the status of networked devices, and display the event log. [. . . ] Waypoint Memory is Full, Can't Create Waypoint--the User Waypoint memory is full. Erase existing waypoints to make room. appendix Shallow Water Alarm--(sonar) the boat has entered the user-defined shallow-water depth. Simulating Operation--the unit is in Simulator Mode. 4 GPSMAP® 4000/5000 Series Owner's Manual Appendix Product Registration Help us better support you by completing our online registration today! [. . . ]