User manual GARMIN GPSMAP 421S

[. . . ] GPSMAP 400/500 series ® owner's manual © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397. 8200 or (800) 800. 1020 Fax (913) 397. 8282 Garmin (Europe) Ltd. [. . . ] This file provides information to MapSource to format the data. This only needs to be done the first time you copy or merge MapSource data to your chartplotter from a specific SD card. GPSMAP 400/500 Series Owner's Manual 2. Check your MapSource version on the computer by clicking Help > About MapSource. If the version is older than 6. 12. 2, update to the most-current version by clicking Help > Check for Software Updates, or check the Garmin Web site at www. garmin. com. Insert the SD card into an SD card reader that is attached to the computer. From within MapSource, click Transfer > Send to Device. From the Send to Device window, select the drive for the SD card reader and the types of data you want to copy to your chartplotter. Insert the SD card into the SD card slot on the front of the unit. From the Home screen on your chartplotter, select Information > User Data > Data Transfer. Complete one of the following: · Select Merge From Card to transfer data from the SD card to the chartplotter and combine it with existing user data. · Select Replace From Card to overwrite the data on your chartplotter. The data is transferred from the SD card to the chartplotter. Viewing Information To transfer data (waypoints, routes, tracks) to an SD card: 1. Insert an SD card into the SD card slot on the front of the unit. From the Home screen, select Information > User Data > Data Transfer > Save To Card. Complete one of the following: · Select the file name from the list. · Select Add New File to create a new file. Enter the file name using the Rocker, and select Done. Select Yes to save waypoints, routes, and tracks to the SD card. The file name is saved with an . ADM extension. To transfer data (waypoints, routes, tracks) from an SD card: 1. Insert an SD card into the SD card slot on the front of the unit. From the Home screen, select Information > User Data > Data Transfer. [. . . ] Avoid chemical cleaners and solvents that may damage plastic components. Capturing Screenshots You can capture a screenshot of any screen displayed on your unit as a bitmap (. BMP) file and then transfer it to your computer. To capture screenshots: 1. Insert an SD card into the SD card slot on the front of the unit. Select Configure > System > Beeper/Display. Select Screenshot Capture to turn screenshot captures On. [. . . ]