User manual GARMIN HUD

[. . . ] Go to www. garmin. com for current updates and supplemental information concerning the use of this product. Garmin and the Garmin logo are trademarks of Garmin Ltd. ?or its subsidiaries, registered in the USA and other countries. ?These trademarks may not be used without the express permission of Garmin. ? [. . . ] See the Important Safety and Product Information guide for more information. ?2 Clean and dry the windscreen with a lint-free cloth. ?3 Pull the white tab to remove the protective layer from the adhesive side of the film. ?4 Apply the film to the window, with the protective layer with the green tab facing out. ?5 Use a card to scrape the bubbles out to the edge of the film. ?Only remove the bubbles when the top protective layer is still on the film. ?The fewer bubbles under the film, the better the view of the data. ?6 Allow the film to dry for 10 minutes. ?7 Pull the green tab to remove the final protective layer from the film. ? Connecting to Vehicle Power You can charge a smartphone device using the USB port on the vehicle power connector. ?1 Plug the vehicle power cable into a power outlet in your vehicle. ?2 Plug the other end of the device power cable to the small hole on the device. ? 3 If necessary, plug the smartphone power cable into the USB port . ? Placing the Device on the Dashboard WARNING When placing the device in a vehicle, observe all placement considerations listed in the Important Safety and Product Information guide. ? 1 Select a location for the device. ?2 Clean and dry the dashboard where you are placing the device. ? 3 Place the device on the dashboard. ?4 Press the base down. ? The base conforms to the shape of the dashboard. ? 5 Adjust the viewing angle as needed. ? TIP: Adjusting the viewing angle can also increase the brightness of the display. ?If the bottom surface of the device slides on the dashboard due to dust and dirt buildup, wipe it clean using a cloth dampened only with water. ?Do not use soap or cleaning fluids. ? Connecting the Device to Your Smartphone Before you can use the head-up display, you must pair it with your smartphone. ?2 Bring the smartphone and the device within 33ft. ?3 On the smartphone, enable Bluetooth wireless technology and search for devices. ?A list of nearby Bluetooth devices appears. ? 1 Connecting the Reflector Lens You can use the snap-on reflector lens instead of the windscreen film. ?This allows you to use the head-up display in other vehicles or in areas where the film is not permitted. ? Getting Started instructions. ?NOTE: After connecting to your smartphone, the Garmin HUD app allows 30 days of navigation. ? [. . . ] The Garmin HUD+ is compatible with iPhone, 3GS or later, iPad 2 or later, some Android?means that an electronic accessory has been designed to connect specifically to iPhone or iPad, 2 Navigation www. garmin. com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 (0) 870 8501242 1-866-429-9296 +43 (0) 820 220230 + 32 2 672 52 54 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 99 + 39 02 36 699699 (+52) 001-855-792-7671 0800 0233937 +47 815 69 555 00800 4412 454 +44 2380 662 915 (+35) 1214 447 460 +386 4 27 92 500 0861 GARMIN (427 646) +27 (0)11 251 9999 +49 (0)180 6 427646 20 ct. /Anruf. 60 ct. /Anruf +34 93 275 44 97 + 46 7744 52020 Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, USA Garmin (Europe) Ltd. [. . . ]