User manual GARMIN IQUE 3600A

[. . . ] iQue 3600a ® integrated handheld operating instructions Introduction © Copyright 2004 PalmSource and Garmin Ltd. Palm OS, the Palm logo, PalmSource, Graffiti, HotSync, Palm, Palm Powered, the Palm Powered logo, the PalmSource logo and the HotSync logo are trademarks of PalmSource, Inc. Garmin® and iQue® are registered trademarks and QueTM is a trademark of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin. [. . . ] For information on attaching a location to an event, please refer to the Que Applications Guide. Chapter 4 Using Basic Applications 4. 7 Basic Applications Overview: Setting Alarms Setting Alarms The Alarm setting lets you set an audible alarm for events in your Date Book, and display a reminder message on-screen. For untimed events, only the reminder message appears. Setting an Alarm for an Event You can set an alarm for minutes, hours, or days before an event. When you set an alarm, an Alarm icon appears to the far right of the event with the alarm. You can also set a silent alarm for untimed events that displays a reminder message on-screen before the day of the event. The alarm triggers at the specified period of minutes, hours, or days before midnight of the day on which the untimed event begins. For example, you set a 5-minute alarm for an untimed event that occurs on February 4. The reminder message will appear at 11:55 p. m. The reminder remains on-screen until you turn on your handheld and tap OK to turn off the reminder. Tap the event to which you want to assign an alarm. The default setting, 5 Minutes, appears. Set the alarm time: · Select the 5 next to the Alarm check box and enter any number from 0 to 99 (inclusive) as the number of time units. · Tap the pick list to change the time unit; select Minutes, Hours, or Days. Enter number of time units here Tap here to select unit of time 5. Tap OK. Chapter 4 Using Basic Applications 4. 8 Basic Applications Overview: Setting Alarms Once an alarm has sounded, you can tap the Snooze option to dismiss the alarm for five minutes. To dismiss the alarm using the snooze option: When the alarm dialog box appears, tap Snooze to delay the alarm for a preset five-minute period. Each time you tap Snooze, the alarm is dismissed for an additional five minutes. Setting Alarm Options You can set the alarm to sound automatically for each new event using preferences. You can also set a tone for the alarm and the number of times the alarm sounds. Open the Preferences dialog box in one of the following ways: · In the Date Book, tap the Menu icon. · Tap the inverted tab at the top of the Date Book screen to display the menu bar. · In the text input area, drag a diagonal line from the lower left to upper right to display the Command toolbar. Type an R, the Graffiti® 2 shortcut for the Preferences command. Select from the following options: · Tap Alarm Preset to set an alarm for each new event automatically. The silent alarm for untimed events is defined by minutes, days, or hours before midnight of the date of the event. [. . . ] Connecting to an ISP requires a third-party application, such as a Web browser or news reader. For information on third-party applications that support TCP/IP, check the Web site: http://www. palmsource. com/applications. pick list in the upper right corner of the screen and select Network. 3. In the Network Preferences screen, tap Connect to dial the current service and display the Service Connection Progress messages. [. . . ]