User manual GARMIN NAVUS GPS

[. . . ] Owner's Manual © Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] To delete the list or delete all points, press MENU and select Delete List or Delete All Finds. Note: Deleting information from the Recent Finds list does not delete the actual city from your detail map, nor does it remove waypoints you created. 30 FINDING PLACES AND ROUTING TO THEM > PLANNING A TRIP USING FIND FEATURES Planning a Trip Using Find Features As you have discovered while reading this section, you can search for places by using a variety of "find" methods. If you are planning a trip and would like to find lodging, restaurants, and other places ahead of time, consider using the "chain find" method below. Do NOT follow these instructions while driving. 1. While still on the information page for Fraser, press the FIND key and select Lodging to look for a place to stay in Fraser. In our example, we chose Karen's Bed & Breakfast. From the information page for Karen's Bed & Breakfast, press the FIND key and select Food & Drink to look for a place to eat near your lodging selection. You can also find entertainment, services, and other places near your chosen lodging area in the city of your choice. When you are ready to take your trip, simply find these places in your Recent Finds list. You can also save places you find as waypoints. See page 15. 31 PLANNING AND MODIFYING ROUTES > PLANNING A ROUTE PLANNING AND MODIFYING ROUTES The quickest way to navigate to a place using your Navus is to find your destination using the FIND key and route to it. But if you want to plan trips where your starting location is not your current physical location, use the Route feature. Once you plan, create, and save the route, you can retrieve it when you need it and you will not have to stop and ask for directions. The Route Menu lists many options for creating routes. To access the menu, press and hold the MENU/ROUTE key on your Navus for two seconds. You can also press MENU, then select Route. Planning a Route To plan a new route: Planning routes is fast and easy once you become familiar with and understand the various steps and options. 1. From the Start Point window, select one of the three options: Current Location, Use Map, or Find. Once you select an option, the Start Point window disappears and an End Point window appears. The End Point window disappears and a Route Preference window appears. Select one of the three options. A route calculation icon appears in the lower left corner of the Map page as the unit calculates the route. A voice prompt sounds and a blue route line appears. The unit is now ready to navigate the new route. 32 PLANNING AND MODIFYING ROUTES > PLANNING A ROUTE As soon as your route is created, your Navus begins to navigate the route. If at any time you wish to stop a route, select Stop Route from the Route menu. To resume the route, select Resume Route. 3. [. . . ] These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than "outdoor" requirements. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]