User manual GARMIN NÜVI 2797LMT

[. . . ] nvi 2707/2708 Series Owner?s Manual March 2013 190-01589-00_0A Printed in Taiwan All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www. garmin. com for current updates and supplemental information concerning the use of this product. [. . . ] The preview includes the distance to the turn or maneuver and the lane in which you should be traveling, if available. ? Navigation Viewing the Trip Information Page The trip information page displays your present speed and provides statistics about your trip. ?NOTE: If you make frequent stops, leave the device turned on, so it can accurately measure elapsed time during the trip. ?From the map, select Speed. ? Avoiding Road Features 1 Select Settings > Navigation > Avoidances. ?2 Select the road features to avoid on your routes, and select Save. ? About Custom Avoidances Custom avoidances allow you to avoid specific areas and sections of road. ?You can enable and disable custom avoidances as needed. ? Viewing the Trip Log Your device keeps a trip log, which is a record of the path you have traveled. ?1 Select Settings > Map & Vehicle > Map Layers. ?2 Select the Trip Log check box. ? Avoiding an Area 1 Select Settings > Navigation > Custom Avoidances. ?4 Select the upper-left corner of the area to avoid, and select Next. ?5 Select the lower-right corner of the area to avoid, and select Next. ?The selected area is shaded on the map. ?6 Select Done. ? Resetting Trip Information 1 From the map, select Speed . ?When not navigating a route, select Select All to reset every data field except the speedometer, on the first page. ?Select Reset Trip Data to reset the information on the trip computer. ?Select Reset Trip B to reset the odometer. ? Avoiding a Road 1 Select Settings > Navigation > Custom Avoidances. ?3 Select the starting point of the section of road to avoid, and select Next. ? 4 Select the ending point of the road section, and select Next. ?Disabling a Custom Avoidance You can disable a custom avoidance without deleting it. ?1 Select Settings > Navigation > Custom Avoidances. ?3 Select > Disable. ? Using Suggested Routes Before you can use this feature, you must save at least one location and enable the travel history feature (page13). ?feature, your device predicts your destination based on your travel history, the day of the week, and the time of day. ?After you have driven to a saved location several times, the location may appear in the navigation bar on the map, along with the estimated time of travel, and traffic information. ?Select the navigation bar to view a suggested route to the location. ? Deleting Custom Avoidances 1 Select Settings > Navigation > Custom Avoidances. ?To delete all custom avoidances, select . ? [. . . ] Verify the interior temperature of the vehicle is between 32 and 113F (between 0 and 45C). ?Verify that the fuse is not broken in the vehicle power outlet. ? Mounting on Your Dashboard NOTICE The permanent mounting adhesive is extremely difficult to remove after it is installed. ? My battery does not stay charged for very long ?Decrease the screen brightness (page13). ?Shorten the display timeout (page13). ? 14 Troubleshooting ? [. . . ]