User manual GARMIN QUATIX

[. . . ] quatix ? Owner?s Manual April 2013 190-01594-00_0B Printed in Taiwan All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www. garmin. com for current updates and supplemental information concerning the use of this product. [. . . ] NOTE: See page6 for more information about the relationship between the data stored by the tack assist feature. ?To recalibrate the port or starboard tack direction, hold a steady course along the intended port or starboard tack, and select Recal. ?. ? Pairing With an Autopilot You can refer to the GHC?owner's manual for more information about using the GHC. ?3 Set the GHC to search for a remote. ? Applications 7 When the devices are paired, the autopilot screen appears on the quatix. ?After your device is paired with your autopilot, it automatically reconnects with your autopilot every time it is within range. ?NOTE: To pair with a different autopilot, hold and to reset the existing autopilot pair, and repeat steps 2 and 3. ? 3 Select a time zone. ? The custom time zone page is added to the current profile. ? Using Autopilot Before you can use the quatix to control an autopilot, you must install and configure a compatible Garmin GHP?autopilot system and pair your quatix with the GHC device. ?For more information, see the owner's manual for your autopilot. ?To engage the autopilot heading hold, hold a steady course, select Engage, and release the helm. ? Editing a Custom Time Zone 1 Select the blue key. ?To change the time zone, select Edit Zone. ?To customize the name of the time zone, select Edit Label. ? Alerts You can set the device to alert you in many different situations where your awareness of the surrounding conditions or other data is important. ?There are three types of alerts: event alerts, range alerts, and recurring alerts. ?Event alert: An event alert notifies you once. ?For example, you can set the device to alert you when you reach a specified elevation. ?Range alert: A range alert notifies you every time the device is above or below a specified range of values. ?For example, you can set the device to alert you when your speed is below 5 knots and over 15 knots. ?Recurring alert: A recurring alert notifies you every time the device records a specified value or interval. ?For example, you can set the device to alert you every 30 minutes. ? Alert Name Alert Type Anchor Drag Event Proximity Distance Time Elevation Recurring Event, recurring Event, recurring Description You can set a maximum distance for your vessel to drift after dropping anchor. ?You can set an interval or a custom distance from your final destination. ?You can set an interval or a custom time from your estimated time of arrival. ? ?To change the heading in 1 increments, with the autopilot engaged, select for port and for starboard. ?To perform a step turn, with the autopilot engaged, hold for port and for starboard. ? [. . . ] Page GPS Off 1 2 3 4 Clock Temperature Barometer Compass By default, these pages appear for the sailing profile when you are tracking or navigating. ?NOTE: The tack assist page only displays when the tack assist feature is enabled (page7). ?Page Tracking 1 2 3 4 5 6 7 8 9 Tack assist Course over ground and speed over ground Distance and time Compass Barometer Temperature Map Clock Navigating Tack assist Tracking with NMEA 2000 Data Tack assist Navigating with NMEA 2000 Data Tack assist Distance to next, elapsed time, and Course over ground, depth, and Course over ground, depth, and bearing speed over ground speed over ground Course over ground and speed over ground Distance and time Compass Barometer Temperature Map Clock Map Wind VMG TWS and TWD AWS and AWA Clock Bearing and distance to opposite tack Map Wind VMG and TWS AWS and AWA Clock By default, these pages appear for the powerboat profile when you are tracking or navigating. ?Page Tracking 1 2 3 4 5 6 7 8 Course over ground and speed over ground Distance and time Compass Barometer Temperature Map Clock Navigating Tracking with NMEA 2000 Data Navigating with NMEA 2000 Data Estimated time en route, distance, and estimated time of arrival Map Water temperature and depth Clock Course over ground and speed over ground Distance to next, elapsed time, and Course over ground and bearing speed over ground Course over ground and speed over Map ground Distance and time Compass Barometer Temperature Map Clock Water temperature and depth Clock By default, these pages appear for the water sports profile when you are tracking or navigating. ? [. . . ]