User manual GARMIN QUEST

[. . . ] pocket-sized navigator Quest and Quest 2 ® ® owner's manual © Copyright 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. Garmin Corporation st 1200 East 151 Street, Unit 5, The Quadrangle, Abbey Park Industrial No. 68, Jangshu 2nd Road, Shijr, Estate, Romsey, SO51 9DL, U. K. [. . . ] Select your ending location. Highlight Navigate to start navigating this route. If you want to stop a route, select Stop Navigation from the Route Options menu. To resume the route, select Resume Navigation. Finding Route Points Your Quest provides four options for selecting your starting and ending locations: None--begin the route wherever you are located at the present time. Current Location--begin or end the route at the address at which you are currently located. For example, if your current location is at 915 Elm, the Quest enters this address as the Current Location. Find Menu--search for a starting or ending location using the Find Menu. When the Map page appears, use the Rocker pad to move the map pointer to the location and press OK. Planning a Route Planning routes is fast and easy: simply pick a starting location and an ending location. 1. Press MENU, highlight Route Options, and press OK. From the Route List page, highlight New and press OK. From the Route Planner page, highlight <Select your starting location> and press OK. Highlight one of the four options (described to the right) and press OK. Select your starting location. To plan a route: 22 Quest Owner's Manual BASIC OPERATION > PLANNING AND MODIFYING ROUTES Saving a Route You Quest automatically saves a route created with the Route Planner. Also, you can save an active route during navigation or after you have reached the destination. Press MENU, highlight Route Options, and press OK. Press OK again at the verification window. 3. Highlight the name of the route and press OK. An information page for your selected route appears. To activate the route, highlight Navigate and press OK. If you want to change the route by adding via points, use the Rocker pad to highlight the Via Points box and press OK. See "Adding Via Points" in this section for more information. Deleting a Saved Route Your Quest can hold up to 50 saved routes. If you have saved routes prior to taking a trip, you only need to retrieve the appropriate route and activate it as you prepare to leave. You can delete a single route or all of the saved routes that exist in your Quest. 1. [. . . ] THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. Some states do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. [. . . ]