User manual GARMIN QUEST2 QUICK REFERENCE QUIDE

[. . . ] You can also highlight Spell City, and press OK. Enter the city using the on-screen keyboard. Enter the address number and street using the on-screen keyboard. For intersections, you only need to enter street names. [. . . ] For optimal use, position the antenna parallel to the surface of the road. Release tab Suction cup Vehicle Installation 1. Align the ball on the end of the suction mount with the socket (hole) on the back of the cradle. Press firmly to snap the mount and cradle together. Flip up the antenna on the back of the unit. Angle the Quest forward and fit the bottom of the Quest into the cradle. Tilt the unit back until it snaps in place. To ensure a tight grip, clean and dry your windshield before you mount the suction cup. Flip the lever on the suction cup toward you. Place the suction cup on your windshield. Flip the lever back, toward the windshield. Plug the power cable into an available receptacle. To install the vehicle suction cup mount: To find a place and route to it: To stop or resume the current route: To add via points (extra stops) during a route: To find an address and route to it: Cradle Lever Suction cup tab NOTICE TO STATE OF CALIFORNIA DRIVERS: California Vehicle Code Section 26708 (a) (1) provides that drivers in California should not use suction mounts on their windshield or side or rear windows. Other Garmin dashboard or friction mounting options should be used. For available accessories, refer to the Garmin Web site at www. garmin. com. Also, refer to the Owner's Manual for instructions on using the included mounting disk with the suction cup mount. January 2006 Printed in Taiwan Adding Detours and Planning Routes 1. Press the MENU key, highlight Route Options, and press OK. From the Detour Distance page, highlight the distance for which you would like to alter your route, and press OK. Your original route is recalculated to avoid the upcoming section of road. Press the MENU key, highlight Route Options, and press OK. From the Route List page that appears, highlight New, and press OK. Highlight <Select your starting location>, and press OK. Select one of the three options, and then select your starting location. Highlight <Select your destination>, and press OK. [. . . ] Press FIND two times to display the Recent Finds page. Press and hold MENU to display the Route Options menu. Press MENU two times to display the Settings page. Press and hold OK to display the Where Am I? [. . . ]