User manual GARMIN RINO 110

[. . . ] ® 2-way radio & personal navigator® owner's manual 110 © Copyright 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] The page has a New button, a list of routes, and the number of unused routes. Use the Thumb Stick to highlight the New button and press it In to display the route Setup Page. To create a route: 3. With an empty row (dashed) in the route list highlighted, press the Thumb Stick In to display the Find `N Go Menu. Select a route waypoint from one of the Find `N Go Menu categories and display the Information Page for the selected waypoint, city, exit, point of interest, etc. Highlight the on-screen Use button and press the Thumb Stick In to place it on the route. To add more waypoints to the route, repeat the process in Steps 3 and 4. The route is named for the first and last waypoints on the route. You can add waypoints to the end of an existing route at any time by using the Find `N Go Menu. 49 Rino® 110 Owner's Manual UNIT OPERATION > ROUTE PAGE 1. Select an item from the Find `N Go Menu and display its Information Page. If a contact is used in a route, the route changes as the contact's position is updated, or it may be saved as a Waypoint to serve as a stationary point. Select the page Option Menu and select Add To Route to display the list of routes. Highlight and select the route desired and then press the Thumb Stick In. A "Waypoint Added Successfully" message displays. To add a Find `N Go Menu item to a route: Route Options 1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu. Highlight the Reverse Route option and then press the Thumb Stick In to reverse the order of waypoints in the list. To change the route back to the original order, repeat this process. To reverse the route: Editing a Route 1. From the Route Page, select the on-screen Option Menu button and press the Thumb Stick In to access the Option Menu. Highlight the Remove All option and then press the Thumb Stick In to remove all waypoints from the list. When you see the prompt "Do you really want to remove all waypoints from the route?", select Yes. 50 To remove all waypoints: Rino® 110 Owner's Manual UNIT OPERATION > ROUTE PAGE 1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu. Highlight the Copy Route option and then press the Thumb Stick In to copy. The copied route displays on the Route Page and is named the same but followed by the numeral 1 (one). You may then rename and/or modify the copied route. [. . . ] These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should ALWAYS keep the radio more than six inches from their pacemaker when the radio is turned on, should not carry the radio in a breast pocket, should use the ear opposite the pacemaker to minimize the potential for interference, and should turn the radio off immediately if you have any reason to suspect that interference is taking place. Hearing Aids--Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. [. . . ]