User manual GARMIN RINO 530HCX

[. . . ] Owner's Manual Rino ® 520-530HCx 2-way radio and GPS © Copyright 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. Garmin Corporation 1200 East 151st Street Liberty House No. 68, Jangshu 2nd Road Olathe, Kansas 66062, U. S. A. [. . . ] While you are navigating a route, the bearing pointer indicates the direction (a bent arrow) of the turn to the next point in the route as well as the direction to the current point. For example, if the arrow is pointing straight up, you are going directly to your destination. If it points any direction other than up, turn and move towards the direction the arrow is pointing until it points up, and then continue in that direction. If you are using the course pointer option instead and you drift away from the original line of travel to your destination, the course deviation indicator (CDI) provides graphic indication of drift (right or left) and shows the distance off course. Bearing pointer Compass ring Rino 520HCx and 530HCx Owner's Manual 2 BaSIc operatIon When you are not on an active Go To, track, or route (in other words, not traveling to a recorded destination), the compass ring shows your heading while you are moving, but the data fields at the top of the page do not show any destination related data, such as estimated time of arrival. Compass Page Options CDI scale Compass page with course pointer and course deviation indicator (CDI) scale active. 1. Open the option menu of the Compass, Highway, or Map page. Select Stop Navigation. To stop navigating: · Sight`NGo--use the Sight `N Go feature to locate a landmark visually and then lock in a magnetic heading to it. (Rino 530HCx feature only. ) · StopNavigation/ResumeNavigation--cancels/ resumes navigation. · Recalculate--recalculates the active route. · BearingPointer/CoursePointer--toggle between bearing (always directed toward your destination) and course (shows amount of correction needed to get back on course. ) · ShowDataFields--toggle to show data fields on the display or removing the data fields. · CalibrateCompass--calibrates the electronic compass. (Rino 530HCx feature only. ) · RestoreDefaults--return options and data field choices to factory designations. 2 Rino 520HCx and 530HCx Owner's Manual BaSIc operatIon Using Sight `N Go Available for the Rino 530HCx only, use this feature to visually locate an object and navigate to it. 1. Use the Page/Quit key to access the Compass page and then use the Rocker to access the option menu. Use the Rocker to select Sight `N Go and press in. The compass ring with pointer is in-line with the two sighting marks on the case. Hold the Rino 530HCx at eye level and line up the two sighting marks on the case with a distant object. Select Set Course to open the Compass page. Select Project Waypoint to open the Project Waypoint page. Enter an estimated distance and then select GoTo to navigate to the point using the Map page. Rino 520HCx and 530HCx Owner's Manual 6. Follow routing directions on the Map page or use the compass for bearing or course navigation. Sighting marks To use Sight `N Go to navigate: Rino 530HCx held level for Sight `N Go To view your destination as a waypoint, select Project Waypoint and press Enter. To re-sight the destination, press Enter when Re-Sight is selected. Calibrating the Compass When you first use the Rino 530HCx, the electronic compass must be calibrated outdoors and away from metal objects. The accuracy of the electronic compass is adversely affected if the unit is held near items that generate magnetic fields. Recalibrate after significant events such as location or temperature changes. 2 BaSIc operatIon 1. [. . . ] Operation on the GMRS frequencies is subject to rules as specified in 47 CFR Part 95. In order to transmit on GMRS frequencies, you are required to obtain a license from the FCC. An individual 18 years of age or older, who is not a representative of a foreign government, is eligible to apply for a GMRS license. To apply for a GMRS license, you need FCC Form 605 (605 Main Form and Schedule F) and FCC Form 159. [. . . ]