User manual GARMIN SL 30

[. . . ] SL30 nav com pilot's guide TM © 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] 119. 10 s124. 55 SLE ats 124. 55Y 12 Advanced Operation Weather Channels Com Mode The standard weather channels are stored in the memory of the SL30. You cannot transmit on a weather channel frequency. Weather channels are not available in all locations. Weather Frequencies 162. 400 MHz 162. 425 MHz 162. 450 MHz 162. 475 MHz 162. 500 MHz 162. 525 MHz 162. 550 MHz 1. Turn the LARGE knob to the Weather channels. 119. 10 s124. 55 weather 162. 40Y 2. Turn the SMALL knob to choose the desired weather channel. Press the FLIP/FLOP button to make the selected weather channel the Active channel. Emergency Channel The standard emergency channel (121. 50 MHz) is stored in the memory of the SL30. 1. Turn the LARGE knob to the Emergency channel. 119. 10 s124. 55 emrgncy 121. 50 2. Press the FLIP/FLOP button to make the Emergency channel the Active channel. 13 Advanced Operation Com Mode Stuck Mic The SL30 helps protect you from a situation where the microphone may get stuck in the ON or Transmit position. If the microphone is keyed for longer than 35 seconds, the SL30 will return to the receive mode on the selected frequency. A "Stuck Mic" message will display until the transmit key is released. Note: In an emergency situation, if the "Stuck Mic" message remains after you have stopped keying the mic, turn the power off and then back on. You will then get another 35 second time-out period to transmit. Intercom Function When two headphone and microphone jacks are connected to the SL30. Headsets can be used in conjunction with the internal voice-activated intercom. When you select the Intercom function with the installed selector switch, the intercom function is enabled. The Volume control may control the headphone listening level. See the System Mode information for setting up the Mic squelch, transmitting mic, and Intercom volume. 14 Advanced Operation Nav Radio Mode Monitoring the Standby Nav channel Nav Mode The Nav radio provides a monitor function for VORs as the standby channel similar to the Com radio. The monitor function is activated or deactivated by pressing the NAV button while in the Nav function. The From radial for the standby channel is shown in parentheses when the VOR monitor mode is activated. This replaces the station identifier, OBS course, or VOR/LOC indicator. A small "m" will replace the "s" in front of the Standby frequency. The Standby VOR radial is updated once per second. 111. 80 m117. 40 (267) from 115 If no signal can be tracked on the standby channel, then it will be dashed out. 111. 80 m115. 40 (---) from 115 The VOR Monitor function is turned off when you flip/flop frequencies, recall a frequency, or press NAV again. [. . . ] Also, be sure to record your serial number in the space provided to the left. If you have any questions, Garmin's Product Support department may be reached Monday through Friday, 8:00 AM to 5:00 PM Central Standard Time, by phone at 1-800-800-1020, or by e-mail at sales@garmin. com. NOTE: If you have previously registered a Garmin product purchase, we invite you to re-register using our NEW on-line system. Many services provided by our new product registration system are now being automated and re-registering your purchase ensures you the best possible support from Garmin. 45 Appendix This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option, repair or replace any components that fail in normal use. [. . . ]