User manual GARMIN STREETPILOT 2620

[. . . ] StreetPilot 2620/2660 portable car navigation owner's manual StreetPilot 2660 pictured StreetPilot 2620 not shown Copyright 2004, 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 Garmin (Europe) Ltd. [. . . ] (Note: If you touch the X in the top right corner of the `Edit Vias' page, your StreetPilot will remove the newly-created via point and continue to use the original route. ) 6. To add more via points, select `Add Another' from the `Edit Vias' page and repeat steps 3-5 above. You can add a via point in order to add an extra stop to your route. Select the Add/Edit Vias icon from the Active Route menu shown above. An Edit Vias page will appear (below) that lists your final destination. 34 Arranging Via Points If you add more than one via point, you may want to arrange the order of the stops (or points) on the route to minimize route length. In the example at right, numerous stops have been added to a trip to the Kansas Speedway. The order is random because all via points have just been added. Note that the highlighted via point, Olathe J, is fourth on the list. If you have a definite order for the places you would like to visit, you can arrange the order by highlighting a via point and moving it up or down by using the up/down arrows on the Edit Vias page. Thus, if you wish to make Olathe J second on your route, move it accordingly, as shown at right. Note that you can also change the final destination (Kansas Speedway) by manually moving a via point into the final position that displays the blue checkered flag. To create a route through all via points that is optimized for distance, simply select Auto Arrange from the Edit Vias page (as shown at right). . A window appears that asks if you also want your destination point to be reordered. Answer Yes, and the unit arranges all of your stops, including the destination point. Answer No, and the unit arranges all of your stops EXCEPT the destination point. Deleting Via Points If you decide that you no longer want to visit one of your via points, simply touch that point to reveal information about the selected via point. Select Remove and then select Yes to verify, and the via point will be removed from your route. Reference Creating Routes Once you find the location that you would like to add (by using Use Map or Find), select the location, and information about it will appear. Select Add As Via, and the location will appear as a via point, shown below. When you opt to have the StreetPilot auto arrange your via points, a window will appear that will ask you if you want your destination point to be reordered. If you answer yes, your destination point will be reordered, but only if doing so creates the shortest route. 35 Reference Measuring Distances Measuring Distances Between Two Places You can get an idea of how far two points are from each other by using the Measure Distance feature. This feature measures from point to point in a straight line. To measure the distance between two points, make sure you are currently viewing the Map page. Then, press the unit or remote MENU key. An on-screen pointer (a blue thumb tack) at your current physical location (or current point) will appear on the Map page. [. . . ] This warranty does not cover failures due to abuse, misuse, accident, or unauthorized alteration or repairs. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. [. . . ]