User manual GARMIN ZŪMO 220

[. . . ] zmo 200 series ® owner's manual for use with the zmo 220 © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397. 8200 or (800) 800. 1020 Fax (913) 397. 8282 Garmin (Europe) Ltd. [. . . ] Touch Save to save the new rates, or touch restore to use the original rates. Traffic You can only access the traffic information if your zmo is connected to an optional FM traffic receiver. For more information, see pages 28­30 and www. garmin. com/traffic. zmo 200 Series Owner's Manual 2 Using FM Traffic Using FM Traffic NOTE: You must purchase the traffic receiver separately. Use an FM TMC (Traffic Message Channel) traffic receiver to receive traffic information that is broadcast over the FM Radio Data System. The traffic receiver is integrated in the vehicle power cable. To a power outlet in the vehicle To the power connector on the zmo FM TMC Traffic Receiver NOTE: Garmin is not responsible for the accuracy of the traffic information. The traffic receiver receives signals from the traffic service provider and displays that information on your zmo. Traffic in Your Area When you are receiving traffic information, a traffic icon appears in the upper-right corner of the map. The traffic icon changes color to indicate the severity of traffic conditions on your route or the road you are currently driving on. Traffic icon If the zmo is connected to the traffic receiver and connected to vehicle power, and you are in a coverage area, the zmo can receive traffic delay information. For more information, go to www. garmin . com/traffic. 2 zmo 200 Series Owner's Manual Using FM Traffic Severity Color Code The color of the traffic icon indicates the severity of the traffic delay. Color Green Yellow Red Gray Description Meaning Traffic on Your Route Low severity Traffic is flowing normally. Medium severity High severity No data Traffic is slightly congested. Traffic is heavily congested or stopped. Traffic data has not updated. When calculating your route, the zmo examines the current traffic and automatically optimizes the route for the shortest time. If a severe traffic delay occurs on your route while you are navigating, the zmo automatically recalculates the route. You might still be routed through traffic if no better alternative routes exist. If a non-severe traffic delay occurs on your route, the traffic icon displays a tab that shows how much time the delay has added to your route. This time is already included in your estimated arrival time. To manually avoid traffic on your route: 1. Touch the arrows to view other traffic delays on your route, if necessary. Touch Avoid to avoid the traffic delay. zmo 200 Series Owner's Manual 2 Using FM Traffic Viewing the Traffic Map 1. On the map, touch the traffic icon. The Traffic map shows color-coded traffic flow and delays on nearby roads. 1. On the Map page, touch the traffic icon. Touch Traffic Search to view a list of traffic delays. To view details, touch an item in the list. If there is more than one delay, touch the arrows to view additional delays. Viewing Traffic Delays Traffic Subscriptions 2. Touch Show Traffic Map to view the traffic incidents on a map. For information about adding or renewing a traffic subscription, see page 36. To return to the normal map from the Traffic map, touch the traffic icon, and touch Show Normal Map. 0 zmo 200 Series Owner's Manual Customizing the zmo Customizing the zmo 1. [. . . ] To avoid draining the battery, remove the battery when your zmo is not in use. My battery gauge does not Allow the unit to fully discharge, and fully charge it (without seem accurate. Hold your finger on the lowerright corner of the zmo screen How do I clear all my user while it is turning on. Keep your finger pressed until the message data?If the zmo stops functioning, turn the zmo off and on again. [. . . ]