User manual GAS GAS TXTPRO 2009

[. . . ] TXT PRO´09 GAS GAS thank you for the trust you have placed in us. By choosing the new GAS GAS TXT Pro 2009 you have become part of the great GAS GAS family and, as a user of the number one manufacturer of off-road motorbike, you deserve the distinguished treatment that we wish to offer to you both in our after-sale relationship and in the explanations that we provide in this manual. Our Pro 2009 is a bike conceived for the practice of highcompetition trial. It is actually the fruit of many years of competition and experimentation in this demanding discipline, as well as the many great successes achieved thanks to great trial riders who have contributed with their expertise to the basic data that have allowed us to create a high-level motorbike, a GAS GAS which counts on its low weight as a significant key factor. Congratulations for making the right choice. [. . . ] The digital tachometer displays up to 12, 000 rpm. The tachometer signal can be captured from the sparkplug cable. Gear change indicator according to rpm This function permits setting an indicator for changing gears at a specific rpm level. The red LED warning light flashes when the rpm reaches the specific level and stops flashing when the gear is changed. SPD: Speedometer The speedometer information appears in the centre of the screen. MS: Maximum speed gauge It shows the highest speed reached since the last resetting of the data. DST: Distance travelled This appears on the right side, in the second line of the screen. The TRIP function contains the vehicle's accumulated mileage since the last RESET operation. ODO: Odometer It shows the total mileage accumulated by the vehicle. The data is stored in the memory, even when the device is not running. ART: Time of use controller Calculates the total time in operation. It starts counting from the moment the motor is turned on. RT: Total time of use controller It calculates the vehicle's operation time since the last RESET operation. It starts counting from the moment that movement begins. The data is stored in the memory, even when the device is not running. 12/24 hour clock It shows the time in either 12 or 24 hour formats. Ambient temperature / engine temperature gauge The ambient temperature is displayed on the upper left-hand part of the screen. The screen can display the engine temperature from an optional temperature sensor. If this is too high, a warning LED lights up in yellow. High rpm gauge / Gear change warning according to rpm If the rpm are too high, the second warning LED lights up in red. This function permits setting an indicator for changing gear at a specific rpm level The red LED warning light flashes when the rpm reaches the specific level and stops flashing when the gear is changed. -44- Setting the multifunction display parameters After confirming each value, the display goes from one screen to the next until all have been displayed. If no button is pressed, the display returns to the home screen after 15 seconds. Activating adjustment mode To start setting mode for the multifunction display, press buttons 1, 2, and 3 simultaneously for 3 seconds, and then release. [. . . ] - Loose handlebar bracket, and loose handlebar stem locknut. REMEDY - Tighten steering bracket and steering stem locknut to the correct torque values. - Tighten steering bracket and steering stem locknut to the correct torque values. - Drain the brake fluid and fill with the new fluid recommended by the manufacturer. - Adjust brakes. 18 Motorcycle pull to one side - Bent chassis. [. . . ]