User manual GATEWAY 18

[. . . ] Your Gateway 18" LCD TV user'sguide Setting up Troubleshooting Contents 1 Introducing Your Gateway LCD TV . Connecting your HDTV decoder set-top box . Using coaxial (RF) audio and video (VCR only) . 16 17 17 18 19 20 20 21 21 22 23 24 24 25 25 3 Adjusting Your LCD TV Settings . [. . . ] Press the INPUT button on the remote control repeatedly to select TV. If you have connected a VCR to the ANT connector on the back of your LCD TV, connect your off-air TV or cable TV cable to the ANT connector on the back of your VCR. Warning If an outdoor antenna or cable system is connected to your LCD TV, make sure that the antenna or cable system is correctly grounded. For more information, see "Television antenna connectors protection (for systems fitted with TV/cable TV tuner cards)" on page 47. 24 www. gateway. com Connecting a computer Connecting a computer Using RGB video To connect your computer using RGB video: 1 2 3 Connect the 15-pin D-Sub RGB connector on your computer to the RGB In connector on the back of your LCD TV. Connect the Audio Out jack on your computer to the PC Audio In jack on the back of your LCD TV. Press the INPUT button on the remote control repeatedly to select PC. www. gateway. com 25 Chapter 2: Connecting Components 26 www. gateway. com Adjusting Your LCD TV Settings Read this chapter to learn how to adjust your LCD TV settings from the on-screen display (OSD). 3 27 Chapter 3: Adjusting Your LCD TV Settings Using the OSD Your LCD TV features an on-screen display (OSD) that lets you adjust and save contrast, brightness, and other settings. Your LCD TV saves changes you make to the settings, even if you turn your TV off. To adjust settings from the OSD: 1 2 3 4 5 6 Press the MENU button on the remote control or on the front of your LCD TV. Press the MENU button on the remote control or on the front of your LCD TV to select the menu you want. Press the or button on the remote control or the CH on the front of your LCD TV to select a menu option. or button Press the ENTER button on the remote control or on the front of your LCD TV to select the option. Press the or button on the remote control or the VOL + or ­ on the front of your LCD TV to adjust the option setting. Press the MENU button on the remote control or on the front of your LCD TV and the OSD closes. If you are using TV, Composite (AV), S-Video, or Component (YPbPr) video for your video source, go to "OSD menus and options (TV and video mode)" on page 29. If you are using RGB (PC) for your video source, go to "OSD menus and options (PC video mode)" on page 30. 28 www. gateway. com Using the OSD OSD menus and options (TV and video mode) You can use these OSD menus and options to adjust various settings for your LCD TV. You may need to readjust brightness after the LCD TV warms up. Adjusts the color saturation making colors more intense. Adjusts the amount of detail enhancement. Not available in YPbPr mode. Sound Balance. Adjusts the balance level between the speakers. Adjusts the treble. Option C-Caption. Activates and selects the closed captioning option. Resets picture settings to the factory default. www. gateway. com 29 Chapter 3: Adjusting Your LCD TV Settings OSD Menu Setup Description TV/CATV Select. When this option is selected, your LCD TV adds all channels that have a signal to the channel list. Delete removes the channel from the channel list. You need the remote control to use this option. OSD menus and options (PC video mode) Main Auto Adjust. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. A 45 Safety, Regulatory, and Legal Information This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a different circuit from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Compliance Accessories: The accessories associated with this equipment are: shielded video cable when an external monitor is connected. These accessories are required to be used in order to ensure compliance with FCC rules. FCC declaration of conformity Responsible party: Gateway Companies, Inc. [. . . ]