User manual GATEWAY GTW-P42M102

[. . . ] Your Gateway Plasma TV GTW-P42M102 user'sguide Setting up Troubleshooting Contents 1 Introducing Your Gateway Plasma TV . Connecting your HDTV decoder set-top box . Connecting external amplified speakers . Connecting an external receiver or amplifier . [. . . ] If you select MONO, your TV will play all sound from TV programs in mono. If you select SAP (Second Audio Program), your plasma TV will play an audio simulcast (usually another language) if a TV program has a SAP. If you turn on this option, your plasma TV only displays channels that have a signal when changing channels. If you are using cable, set this option to CABLE. If you are using an antenna, set this option to AIR. If you turn this option on, your plasma TV displays a colored background instead of static when you change to a channel that does not have a signal. You can also select the background color for this option. 4 Press the arrow buttons or the ADJ + or ­ buttons to change the settings. 44 www. gateway. com Setting up a favorite channel Setting up a favorite channel You can change the favorite channel settings using the remote control or the OSD. To set up a favorite channel using the remote control: 1 2 3 4 Press the CH UP or DOWN buttons on the remote control to scroll to the channel you want to set as a favorite channel. Press the FAV. SET button on the remote control. The channel is now set as part of the favorite channel selection. To watch your favorite channel, press the FAV. CH button on the remote control. If you want to remove a favorite channel, tune to the channel, then press the FAV. SET button again. The OSD sets the channel status to NORMAL. To set up a favorite channel using the OSD: 1 2 Press the MENU/ADJ arrow buttons on the remote control or the MENU + or ­ buttons on the front control panel to display the OSD menu. Press the arrow buttons or the ADJ + or ­ buttons to select the TV menu. PICTURE SOUND PIP/POP TV OTHER CHANNEL 12 CHANNEL STATUS NORMAL MTS STEREO CCD OFF V-CHIP OFF SET PARENTAL CODE DISABLE SET RATE DISABLE CH SEARCH DISABLE TUNER SOURCE CABLE BACKGROUND ON BACKGROUND COLOR BLUE SELECT ITEM ADJUST VALUE www. gateway. com 45 Chapter 3: Using Your Plasma TV Controls 3 4 5 Press the arrow buttons or the MENU + or ­ buttons to select the CHANNEL STATUS option. Press the arrow buttons or the ADJ + or ­ buttons to change the CHANNEL STATUS setting to FAV. To watch your favorite channel, press the FAV. CH button on the remote control. Locking channels If you do not want a channel to be accessible, you can set the channel lock for that channel. When you tune to a locked channel, you are prompted to enter your password. To lock a channel using the remote control: 1 2 3 Press the CH UP or DOWN button to select the channel you want to lock. Press the CH LOCK button on the remote control. If you have not set a password, enter 0000. For more information about setting a password, see "Setting a password" on page 55. The channel is locked, and you cannot view the channel unless you enter the password. If you want to unlock the channel, press the CH LOCK button again, then enter the password. 4 46 www. gateway. com Quick View To lock a channel using the OSD: 1 2 Press the MENU/ADJ arrow buttons on the remote control or the MENU + or ­ buttons on the front control panel to display the OSD menu. Press the arrow buttons or the ADJ + or ­ buttons to select the TV menu. PICTURE SOUND PIP/POP TV OTHER CHANNEL 12 CHANNEL STATUS NORMAL MTS STEREO CCD OFF V-CHIP OFF SET PARENTAL CODE DISABLE SET RATE DISABLE CH SEARCH DISABLE TUNER SOURCE CABLE BACKGROUND ON BACKGROUND COLOR BLUE SELECT ITEM ADJUST VALUE 3 4 5 Press the arrow buttons or the MENU + or ­ buttons to select the CHANNEL STATUS option. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a different circuit from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Compliance Accessories: The accessories associated with this equipment are: shielded video cable. [. . . ]