User manual GE GE29393

[. . . ] The default greeting is "Record after tone". Sample greeting: "Hi, this is (use your name here). I can't answer the phone right now, so please leave your name, number, and a brief message after the tone, and I'll get back to you. After the tone, you have 30 seconds to record your greeting. [. . . ] To change the ring to answer, press and release the [NEXT] or [PREVIOUS] button until the desired setting is announced. (Available options are 2, 4 or Toll Saver) 3. To store the number of rings to answer, press and release the [STOP/SET] button. The unit confirms the setting and enters the Security Code menu. Toll Saver The toll saver allows you to save the cost of making a call when you are accessing your messages remotely. · · If you have new messages, the unit will answer after the 2nd ring. If you have no new messages, the unit will answer after the 5th ring. Therefore if you have no messages you can hang up after the 3rd ring and save the cost of making a call. 7 Setting the security code This setting allows you to change the security code used to access your answerer from a remote location. The unit announces, "Security code (the current code setting) To set security code, press next. . . To change the first security code number, press and release the [NEXT] or [PREVIOUS] button until the desired setting is announced. The unit announces all three numbers, but only the first number will change. To store the first number, press and release the [STOP/SET] button. To change the second and third number, follow steps 2 and 3 above. The remote function will not work with rotary or pulse dialling telephones. Also some dialling telephones only output tones for a fraction of a second. If you experience difficulty with remote access operation, try another telephone, or use a separate tone generator. Cut out the wallet-size remote access instruction card on page 11 for reference during remote access. After you hear the beep that follows the greeting, enter your 3-digit security code. To by-pass the greeting, you can enter your security code any time while the greeting is playing. The unit plays the remote menu after the correct security code has been entered. Menu selection can be made while the menu is playing. Note: The unit answers on the 10th ring if the unit is turned off or the memory is full. To access the answerer, enter the 3-digit security code after the beeps. If the memory is full, play your messages and erase some of them to restore memory. [. . . ] · Telephone extension is picked up before the 2nd ring and the answerer is set to answer after 2 rings. Set rings to answer to 4. Incoming messages are incomplete Does not respond to remote commands Answerer does not work Cannot hear messages Unit announces "Low Battery" Cannot restart the message Message indicator flashes rapidly Greeting continues to play even after an extension telephone is picked up 11 Warranty This product is warranted for a period of 12 months from the date of purchase. In the event of equipment failure, please return this product with the proof of purchase to the store where it was purchased. This waranty does not cover damage caused by lightning, power surge, misuse or neglect, vermin infestation, accidental damage or any alteration that affects the performance or reliability of the product. Remote Access Instruction Card Please cut out the remote access card below and keep it for reference during remote access. Fold here 29878 GE Answerer 1. [. . . ]