User manual GEMINI INDUSTRIES J44416

[. . . ] DIGITAL CAMERA GEMINI J44416 INSTRUCTION MANUAL -1- Warning For customer in the U. S. A. FCC Statement This device complies with 15 the FCC Rules. Operation is subject to the following two condition: (i) This device may not cause harmful interference, and (ii) this device must accept any interference received, including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] You can also choose to register to Ulead though Internet. - 14 - Installing the software ­ Acrobat Reader 5. 05 Insert the J44416 CD into your CD-ROM drive. Otherwise, go to Start Run and type "D:\autorun. exe" (where D:\ is your CD-ROM drive). The following screen will appear on your monitor. Press the "Acrobat Reader" 2. Click "Next" on the welcome screen to continue setup. 3. Click "Next" on the destination folder. 4. Click "OK" to complete setup. - 15 - Connecting the J44416 to your PC When you finish taking pictures, you can connect your camera to your PC and upload your images through the USB cable supplied. Plug one end of the USB cable into your camera and the other end into the USB port of you PC (located either at the back your PC or in the front panel). When the camera is connected, you will hear a beeping sound from the camera indicating that the PC is supplying power to the camera, The image counter will appear on the LCD. If you connect the J44416 in first time, your operating system will ask for driver location, please insert the driver CD and select the CD-ROM for driver searching. Uploading your pictures & video clips to your PC 1. Make sure that your camera is securely connected to your PC and the "PC" is shown on the LCD. Double click the shortcut "MarsCam VGA" on your desktop. The twain driver will detect the storage of the camera automatically and then a window will pop up and ask for uploading. All pictures and videos clip will show on the twain driver. Highlight the picture or video clips you want. Press "save" icon Select a directory to keep the picture and then you can find images later. For example (C:\MyDocuments\MyPictures) The pull down arrow allows you to select the file format in which the image will be saved. The JPG file format is smaller without any reduction in image quality. Press "save" button to save your picture. Note: If the short cut file "MarsCam VGA" does not appear on the desktop that indicates the driver has not been installed properly. You can also download the picture when you using Ulead software. - Click Get Photos and select "Digital Camera". Preset "VGA Dual Camera" to digital camera. - Select "VGA Dual Camera" on the left and then press "Acquire" to download photos. - 16 - - The twain driver will detect the storage of the camera automatically and then a window will pop up and ask for uploading. All pictures and videos clip will show on the twain driver. Highlight the picture or video clips you want. Press "Option" "Transfer" can transfer the picture to Photo Express directly. Now you can rotate, crop and modify your picture as you like though the Ulead photo Express 4. 0. Live Video mode The J44416 can be used as a web cam with different videoconference and video capturing software available in the market. [. . . ] Do not cover or wrap the camera This can cause heat to build up and distort the casing or cause a fire. If the battery leaks and fluid gets into our eyes or comes into contact with your skin or clothing, this can cause injury or loss of eyesight. Immediately flush the affected area thoroughly with clean water and seek medical treatment. When discarding or storing batteries, cover the battery terminals with insulation tape. Contact with other metallic objects or batteries could cause the batteries to ignite or burst. [. . . ]