User manual GEMINI MM-04

[. . . ] CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] When using (a) turntable(s), you will need to ground the RCA cable(s) by screwing in the grounding fork(s) to the GROUNDING SCREW (65) located in the rear panel of the MM04 mixer. This is located in between the CONVERTER SWITCHES (9, 12). The stereo LN INPUTS only accept line level inputs such as a CD, DAT, MiniDisc, etc. 4U 19" rack mounted audio EFX mixer 4 stereo channels 6 line, 3 mic, 2 convertible phono/line RCA inputs Master, zone & record RCA outputs Balanced master output - 3 band rotary line EQ control per channel with cut feature - Bright blue LCD display - 26 DSP effects module with a wide range of parameters - Dry/Wet fader control - Rotary control EFX selector - Rotary parameter control - Large backlit soft touch on/off EFX button - Fully removable, user replaceable Rail Glide cross fader - Assignable cross fader - Rotary gain control per channel - Dual VU display with bright LED - Push-button cue section with cue/PGM fader control - Rotary master, zone, balance and cue volume controls - XLR-1/4" combo mic input & 2 x 1/4" Mic inputs - 2 band rotary mic EQ controls - Rotary mic volume control - Auto talk-over feature - Face plate located 1/4" headphone jack Headphones may be plugged into the face-plate located 1/4" HEADPHONE JACK (58). All operating instructions should be read before using this equipment. To reduce the risk of electrical shock, do not open the unit. Once all of your connections have been made in the rear panel, turn on the mixer by pressing the POWER SWITCH (64). CH 1: To bring this channel into PROGRAM (PGM), you must first decide which line will be in use. Use the LN SWITCH (22) to toggle from LN 1 (16) to MIC 2 (15) on this channel. Slowly raise the CH 1 FADER CONTROL (28) to a comfortable level, once you've selected the proper line. You can further modify the sound output of this channel by adjusting the rotary GAIN (23), HIGH (25), MID (26), LOW (27) controls located to the left of the CH 1 FADER CONTROL (28). CH 2: To bring this channel into PGM, you must first decide which line will be in use. Use the LN SWITCH (29) to toggle from PH 1/LN 2 (13) to LN 3 (14) on this channel. Slowly raise the CH 2 FADER CONTROL (35) to a comfortable level, once you've selected the proper line. You can further modify the sound output of this channel by adjusting the rotary GAIN (30), HIGH (32), MID (33), LOW (34) controls located to the left of the CH 2 FADER CONTROL (35). CH 3: To bring this channel into PGM, you must first decide which line will be in use. Use the LN SWITCH (36) to toggle from PH 2/LN 4 (10) to LN 5 (11) on this channel. Slowly raise the CH 3 FADER CONTROL (42) to a comfortable level, once you've selected the proper line. You can further modify the sound output of this channel by adjusting the rotary GAIN (37), HIGH (39), MID (40), LOW (41) controls located to the left of the CH 3 FADER CONTROL (42). CH 4: To bring this channel into PGM, you must first decide which line will be in use. Use the LN SWITCH (43) to toggle from LN 6 (7) to MIC 3 (8) on this channel. Slowly raise the CH 4 FADER CONTROL (49) to a comfortable level, once you've selected the proper line. [. . . ] 19"- 4HE- clubmixer mit effekten für rackeinbau 4 stereo kanäle 6 line, 3 mikrofon, 2 umschaltbare phono/line, cincheingänge Drehregler für master, zone, balance und cue master, zone und record cinchausgänge Symmetrischer masterausgang Mezclador club de 4U para montar en rack 19" 4 canales estéreo Entradas RCA 6 línea, 3 micro, 2 convertible phono/línea Volumen Rotativo para master, zona, balance y cue Salidas RCA para master, zona y grabación Salida master balanceada - Console de mixage club rackabke 19'' x 4U - 4 Voies stéréo - 6 lignes, 3 micros, 2 phonos convertibles lignes, Connecteurs RCA - Réglages séparés: sorties master & zone, balance, volume casque - Sorties master, zone et enregistrement sur connecteurs RCA - Sortie master symétrique PASS: All effects are cancelled and the aduio signal runs clear of effects. aUTO PAN: Stereo signal transfers from left to right and right to l e ft automatically. TRANCE: Modulates the frequency sound by giving the waveform a triangular shape. pHASER: Type of flanger that creates phaser effect by adding phase lagged sound. [. . . ]