User manual GEMINI MPX-3

[. . . ] POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. LIGHTNING: For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. [. . . ] CDs are produced by a variety of manufacturers and recorded by many different professional companies as well as the do-ityourselfers at home. Therefore, all CDs do not play the same. The ADCS automatically adjusts the laser in your MPX-3 CD Player for each individual CD you insert into the tray, to give you the best possible performance for every CD you play regardless of how it was manufactured or how it was recorded. With this exclusive system you always get consistent and reliable performance as well as exceptional sound quality every time you play a CD. PLAYBACK DISPLAY BAR: The PLAYBACK DISPLAY BAR (10) displays the remaining play time and time elapsed for each track. The display flashes slowly when the track has 15 seconds remaining and pulses rapidly when play time is down to 5 seconds. pLAY/PAUSE : Each press of PLAY/PAUSE (11) causes the operation to change from PLAY to PAUSE or PAUSE to PLAY. CUE/PREVIEW: With the unit in the PLAY mode and after the CUE POINT has been programmed, pressing CUE/PREVIEW (12) will cause the CD player to enter the PAUSE mode at the programmed CUE POINT. Holding down the CUE/PREVIEW (12) button changes the function to PREVIEW and starts the CD from the programmed CUE POINT. releasing the CUE/PREVIEW (12) button will return the CD laser to the preset CUE POINT. SEARCH (FOLDER/FILE) : The SEARCH (13) buttons are used to move forward or reverse while in PLAY or PAUSE mode. In MP3 MODE use the SEARCH (13) buttons to view which FOLDER/FILE (13) is being read. Press FOLDER to view a FOLDER, then press FILE to view the FILE from the selected FOLDER. If the JOG WHEEL (22) is in TRACK MODE the FOLDER/FILE (13) buttons will correspond with which FOLDER or FILE is being viewed, the TRACK SEARCH (14) buttons also fuction like the JOG WHEEL (22). see the CUE INSTRUCTIONS section for more information. TRACK SEARCH : The TRACK SEARCH (14) buttons let you select a track to play. Do not use this CD player at temperatures below 41°F/5°C or higher than 95°F/35°C. The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be placed on the apparatus. Place the unit in a clean and dry location. Do not place the unit in an unstable location. When disconnecting the power cord from an AC outlet, always grasp it by the plug. To prevent electric shock, do not remove the cover or the bottom screws. [. . . ] , if you have any problems with this unit, call 1-732-738-9003 for customer service. Track Elapsed, Track Remain, or Total remain Instant Start. The FLY CUE (18) function lets you set CUES "on the fly" with the press of a button. Press FLY CUE (18) when the disc reaches the musical location you wish to make your CUE or START POINT. [. . . ]