User manual GEMINI PS-04

[. . . ] CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] - Professional 3 Channel Stereo FX Mixer - 10" 3 stereo channel mixer - 6 line, 3 convertible phono/line, RCA inputs - Master, record, & zone RCA outputs - ¼" balanced outputs - Triple ground screw for easy connectivity Easy removable face plate for user replaceable Rail Glide cross fader Bright blue LCD display for FX names & FX parameters FX assign switch Dry/Wet fader control Rotary FX selector & parameter controls Dual mode backlit FX on/off & cue effect button 3 band rotary line EQ with cut feature & rotary gain channel control Lighted push button cue section Rotary zone & balance controls Dual VU display with bright LED & mode switch Master volume fader control - ¼" headphone output & Mic input - Cue section with rotary cue volume & CUE/PGM controls with cue split /mix switch - Mic section with rotary Mic volume, high & low EQ controls - Fader section with hamster/reverse, slope, & assign switches All instructions should be read before using this equipment. To reduce the risk of electrical shock, do not open the unit. Once all of your connections have been made in the rear panel, turn on the mixer by pressing the POWER SWITCH (4). CH1: To bring this channel into program output (PGM), you must first decide which line will be in use. Use the LN SWITCH (23) to toggle from PH1/LN1 (18) to LN2 (17) on this channel. Once you've selected the proper line, slowly raise the CH1 FADER CONTROL (29) to a comfortable level. You can further modify the sound output of this channel by adjusting the rotary GAIN (24), HIGH (25), MID (27), LOW (26) controls located to the left of the CH1 FADER CONTROL (29). CH2: To bring this channel into PGM, you must first decide which line will be in use. Use the LN SWITCH (30) to toggle from PH2/LN3 (14) to LN4 (13) on this channel. Once you've selected the proper line, slowly raise the CH2 FADER CONTROL (36) to a comfortable level. You can further modify the sound output of this channel by adjusting the rotary GAIN (31), HIGH (32), MID (34), LOW (33) controls located to the left of the CH2 FADER CONTROL (36). CH3: To bring this channel in to PGM, you must first decide which line will be in use. Use the LN SWITCH (37) to toggle from PH3/LN5 (10) to LN6 (9) on this channel. Slowly raise the CH3 FADER CONTROL (43) to a comfortable level, once you've selected the proper line. You can further modify the sound output of this channel by adjusting the rotary GAIN (38), HIGH (39), MID (41), LOW (40) controls located to the left of the CH3 FADER CONTROL (43). Do not expose this unit to direct sunlight or a heat source such as a radiator or stove. This unit should be cleaned only with a damp cloth. When moving this equipment it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. Before plugging this unit into any outlet, make sure that the VOLTAGE SELECTION SWITCH (1) is set to the proper voltage. To change the selection, unscrew the hard plastic protective top with a Phillips head screw driver. Then use a flat head screw driver to move the switch to the proper selection (115V/230V). [. . . ] - Mezclador de 10", 3 canales estéreo - Entradas RCA para 6 línea, 3 convertible phono/línea - Salidas RCA de master, record, y zona - Salida balanceada jack ¼" - Triple conexión de masa para fácil conectividad PASS: All effects are cancelled and the aduio signal runs clear of effects. aUTO PAN: Stereo signal transfers from left to right and right to l e ft automatically. TRANCE: Modulates the frequency sound by giving the waveform a triangular shape. pHASER: Type of flanger that creates phaser effect by adding phase lagged sound. [. . . ]