User manual GENIUS BT-02N

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. [. . . ] It will take around 4 hours to fully recharge this product the next time. The Power LED will be green when battery is fully charged. When charging, the power LED will be red NOTE: - Turn off the product before charging. - It's normal that a rechargeable battery gradually wears down and requires longer charging times. 2-2 Turn on Your Headset: Switch the Power On and the Power LED will be blue. Press and hold the MFB for 3 seconds to let headset enter Standby mode. 2-3 Pairing: NOTE: You have to pair this headset with a PC, mobile phone, and other Bluetooth devices before using this headset. Since "Pairing" creates a link between devices by Bluetooth wireless technology. Press and hold the MFB around 5 seconds until the Mode LED changes from red to blue. Perform a device search for Bluetooth devices (mobile phone, PC USB dongle, Bluetooth audio devices, etc. ) 3. When the search is complete, the Bluetooth device will display the devices found. Select "BT-02N" from the device list and confirm the following screen prompts. When the screen prompt asks for a password, enter the default password "1234" to finish pairing. After the pairing is successful, the Mode LED changes from red to a flashing blue light. 3. How to connect your Bluetooth Headset 3-1 Connect with your PC/NB : The Bluetooth headset supports A2DP/AVRCP protocol. The headset can control Windows media player volume, track, and stop/pause functions. If your PC/NB does not have a Bluetooth device embedded, insert the Bluetooth USB dongle and bundled software so you can connect your Bluetooth headset with your PC/NB. _______________________________________________________________ 6 _____________________________________________________________________________________________English 1. The PC will auto run the Genius screen as below: Click on "IVT Software", and Windows will auto install the IVT Software. (The bundled IVT software version is Ver2. 1. 2. 0. If the PC did not run the auto screen, find the E:/IVT software/Setup. exe, click the file, and the PC will start to install the software. After the IVT software install is complete, the Bluetooth icon will show up on a corner of the screen. Double click on the icon, and the IVT software will pop-up on the screen. 3. Make your BT-02N at pair mode, then press the orange button search all Bluetooth devices in the effective distance. in the middle. The Software will start to _______________________________________________________________ 7 _____________________________________________________________________________________________English 4. When the searching is complete, click the BT-02N headset on the screen, and the top icon "AV profile" and "Headset" profile will light up. 5. [. . . ] For more mobile phone connection information, refer to your mobile phone's user guide. 4. Using your Bluetooth headset 4-1 Control your WMP After connecting with your PC, you can open the WMP (Windows Media Player) to listen to music. As BT-02N supports the AVRCP profile, you can remote control WMP with the headset. Key 1 2 3 Description Multi-Function Button (MFB) Play/pause the music Stop music Function Stop Volume up and Skip forward to the next music track. / Volume up/Skip Forward Press the key once to turn the volume up. Press and hold the button 3 seconds to skip forward to next track. [. . . ]