User manual GENIUS BT-03I

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. [. . . ] Plug your USB cable (Mini B side) into your wireless headset. Plug your USB cable (A side) into your PC/NB. 4 _________________________________________________________________________________________________English 3. The Power key LED will be red when it is charging. When the light turns off, the headset is ready for use. Plug your USB cable (Mini B side) into your wireless headset. Plug the USB (A side) into the adapter, then the plug the adapter into a power outlet. 3. The Power key LED will be red when it is charging. When the light turns off, the headset is ready for use. 1-4 LED light defined: Event Power On Power On after 5 sec. Enter Pairing Connection Mode Adjust Volume Adjust Volume after 5 sec. Answer Call Hang Up Call USB Charger Connected Battery Charge OK * Continuously LED Status Red LED ON, Volume Blue LED ON, Hook Blue LED ON Red LED OFF, Volume Blue LED OFF, Hook Blue LED OFF Red LED blinks fast for 0. 05 seconds, then is OFF for 0. 05 seconds* Red LED blinks slow for 0. 05 seconds, then is OFF for 5 seconds* Volume Blue LED ON Volume Blue LED OFF Hook Blue LED ON Hook Blue LED OFF Red LED ON Red LED OFF 1-5 Buttons defined: Button Press Press Long Press Very Long Press Seconds 3 5 8 5 _________________________________________________________________________________________________English Button 1 function Mode Power OFF Press --- Power On ; Connect to Last Paired Audio gateway and A2DP Media Long Press --- Enter Pairing Very Long Press --- Reset Paired Device Phone Mode Press --- Power Off Long Press --- Power Off Very Long Press --- Power Off Power Button 2 function Phone Mode Event Incoming Call Active Call Hook Short touch --- Answer Call Short touch --- Hang Up Call Volume Slide function Event Volume Control Volume Up Volume Down 2. Getting started 2-1 Power on: After you complete the charging, press the power key for three seconds to turn on the headset. After you turn on the wireless headset, the power LED will be lit RED, the volume and answer key will be lit BLUE. 2-2 Power off: Press the power key for three seconds in any mode and the wireless headset will power off. 2-3 Pairing: When the headset is off, press the power key for five seconds until the RED light blinks quickly, then the headset is under pairing mode. You can connect with other Bluetooth devices now. - Connect with mobile phone Turn on your mobile phone Bluetooth function, then search for the Bluetooth device, and the mobile phone will show "BT-03i" on the screen. [. . . ] When you answer the call, the answer key " " will be lit blue until you finish the phone call. When you want to finish the phone call, just touch the answer key again, and you can hang up the phone call and the blue light will turn off. When you receive a phone call, the music will pause automatically, once you hang up the call, the music will start playing again. [. . . ]