User manual GENIUS CR-802UX COMBO

[. . . ] User's Manual USB 2. 0 Multi-Plus Card Reader w/3-Port Hub Table of Contents Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Driver Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Software Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Installation Verification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Certificate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Disclaimer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Safety Instructions Always read the safety instructions carefully Keep this User's Manual for future reference Keep this equipment away from humidity Lay this equipment on a reliable flat surface before setting it up If any of the following situation arises, get the equipment checked by a service technician: The equipment has been exposed to moisture. The equipment has been dropped and damaged. [. . . ] Please check the package or the vender for the XD picture card support. System Requirements IBM Compatible Pentium-233 MHz or faster, or MAC desktop PCs. OS support: Windows® 98SE Windows® ME Windows® 2000 Windows® 2000 SP4 Windows® XP MacTM 9. X MacTM 10. X or up Package Contents USB 2. 0 Multi-Plus Card Reader w/3-Port Hub x 1 Power Adapter x 1 Software Driver CD x 1 Quick Installation Guide x 1 USB 2. 0 Cable (optional) 2 Specification Product Name Data Transfer Rate USB 2. 0 Multi-Plus Card Reader w/3-Port Hub 1. 5/12/480 Mbps Supports CompactFlashTM Type I/II, IBM MicrodriveTM, SmartMediaTM (SM), Memory Stick ® (MS), Memory Stick PRO® (MS PRO), Memory Stick Duo ®(Adapter needed), Memory Stick Pro Duo ®(Adapter needed), SecureDigitalTM (SD), Mini SD (Adapter needed), MultiMediaCardTM Card Reader/Writer Function (MMC), RSMMC (Adapter needed) and XD** Picture Card 1 slot for SD/MMC 1 slot for MS 1 slot for SM/XD** Picture Card 1slot for CF/IBM Microdrive Data exchange allowed between cards in different slots No driver needed under Windows ME/2000 SP4/XP 3-Port USB 2. 0 Hub USB Hub Function Connects up to 127 USB devices through daisy-chain Over-current detection and protection **Not all types of Card Reader w/3-Port Hub support XD picture card. Please check the package or the vender for the XD picture card support. Driver Installation Windows 98SE Step 1 Insert the Driver CD to your CD-ROM and connect the Card Reader w/3-Port Hub to an USB port of your PC. 3 Step 2 Click Next to follow the wizard to install the driver for USB Hub. Step 3 Select Search for the best driver for your device and click Next to continue. 4 Step 4 Select Floppy disk drives and click Next to continue. Step 5 Click Next to finish the driver installation for USB Hub. 5 Step 6 The pop-up window shows This wizard searches for new drivers. Click Next and follow the wizard to locate the driver for USB Card Reader. Step 7 Select Search for the best driver for your device, and click Next to continue. 6 Step 8 Select Specify a location, click Browse to locate the driver shown as the below image, and click Next to continue. Step 9 Click Next to install. 7 Step 10 The system shows Windows has finished installing the software that your new hardware device requires. Click Next to completely finish the installation. Windows 2000 Step 1 Insert the Driver CD to your CD-ROM and connect the Card Reader w/3-Port Hub to an USB port of your PC. Step 2 Click Next to follow the wizard to install the driver for USB Hub. 8 Step 3 Select Search for a suitable driver for my device and click Next to go. 9 Step 4 Select Specify a location and click Next to continue. Step 5 Click Browse to locate the driver shown as below image and click OK. 10 Step 6 Click Next to continue. Step 7 Click OK. Step 8 Click Browse to locate the driver shown as below image and click OK to continue. 11 Step 9 Click Finish to finish the driver installation for USB Hub. Step 10 Go to System Properties in Control Panel of your system, and click Device Manager in Hardware directory. 12 Step 11 Double-click USB Mass Storage Device in the Universal Serial Bus Controllers directory. Step 12 Click Update Driver to install the driver for USB Card Reader. 13 Step 13 Click Next to follow the wizard. Step 14 Select Search for a suitable driver for my device and click Next to continue. 14 Step 15 Select Specify a location and click Next to continue. Step 16 Click Browse to locate the driver shown as the below image, and click OK to continue. 15 Step 17 Click Next to continue. Step 18 Click Finish, then restart the system to completely finish the installation. 16 Windows ME/2000 SP4/XP The USB Card Reader w/3-Port Hub is fully compliant with plug & play capability under Windows ME, 2000 SP4 and XP system. Software Installation (For Windows 98SE, ME, 2000 and XP) There is an user-friendly software in the attached CD for the driver and custom icon installation. Please follow the instruction as below step by step. The procedure for all supported OS is the same. Please do not connect the card reader w/3-Port Hub with your system before the software has been installed. Step 1 Browse and double-click the USB97C223 Software Installer. exe file in the driver CD. Step 2 Select the language to display from the list below. 17 Step 3 The pop-up window shows Welcome to the USB97C223 Software Installation Wizard. Click Next to follow the wizard. Step 4 The window shows Ready to Install the Application. Click Next to continue. 18 Step 5 Click Finish to finish the installation. MAC Installation MAC 9. X Step 1 Execute the Driver\Drivers\MacOS 9. X\210+223 Mac OS 8-9. sit file in the driver CD. [. . . ] The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer. 27 [. . . ]