User manual GENIUS DV5133

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1). [. . . ] Display screen Backlight Option Enter Button Date Printing (Camera Mode Only) To enable Date Printing: 1. When in Camera Mode, use Up/Down Buttons to select Date Printing, then press Enter Buttons to switch to Date Printing submenu. Use Up/Down Buttons to choose On or Off. Press Enter Button to validate the setting and exit. Display screen Date Printing Option Enter Button NOTE Date will be shown on the printed picture once date printing is enabled. -30- English Voice mode To enable voice recording: 1. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen. Use Right/Left Buttons to move to Voice Option. Then Voice Submenu will pop out on the screen. Use Up/Down Button to move between Enter and Exit Option. Choose Enter option to enable voice recording and press Enter Button to validate the setting and exit. Display screen Voice Option Enter Button Effect Setting There are four modes which are Normal, Black/White, Classic and Negative. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen. Use Right/Left Buttons to move to Effect Option. Then Effect Submenu will pop out on the screen. Use Up/Down Buttons to move between four settings. The change can be previewed immediately. Press Enter Button to validate the setting and exit. Display screen -31- English Setting Menu The Setting submenu contains options for configuring your camera set up. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen. Use Right/Left Buttons to move to Setting option, then Setting Submenu will pop out on the screen. Use Up/Down Buttons to move between settings. Display screen Setting Option Sound (operation sound) Start-Up Screen Time Setting Format Card TV System Language Default Setting Sound Enable or disable Keypad tone and operation sound by using Up/Down Buttons, then press Enter Button to validate the setting. [. . . ] The flash is set to flash off. Measure Wipe clean with a soft, dry cloth or lens paper. Get your subject within the effective focus range. The flash does not fire. The flash cannot recharge. Set the flash to something other than flash off mode. Symptom Even though the flash fired, the image is dark. The image is too dark. Cause The distance to the subject is greater than flash effective range. The image was captured in a dark place while set to flash off. [. . . ]