User manual GENIUS G-SHOT V1010

[. . . ] No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. Federal Communications Commission (FCC) Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The image will display on the TV screen. -14- English Display Image Properties This camera provides image property information, which includes: Image Quality & Resolution Image Filename Date & Time ISO Speed Shutter Speed Aperture Number Scene Mode EV Compensation Color Mode (if Vivid is applied) Sharpness Playback Button AF FLASH 1 2 Turn On camera. Press Playback ( ) button. LCD ON/OFF OK Press <Menu/OK> button and press down arrow () button to select "PICTURE INFO". 3 Press <Menu/OK> button to display. 4 5 Press Left-arrow ( ) or Right-arrow ( ) to navigate images. Press Playback ( ) button to return Review mode. Or, press <Menu/OK> button and select "EXIT MENU". Press <Menu/OK> button again to go back Review mode. Press Playback ( ) button again to return Capture mode. -15- English Deleting Images Deleting Single Image in QuickView Menu/OK Button Playback Button Delete Button AF FLASH 1 After a picture is taken, the image will have a QuickView. While the image is on display, press the Delete ( ) button. LCD ON/OFF OK 2 Press Down-arrow ( ) button to select "YES" and press <Menu/OK> button to delete image. Press "NO" if you want to keep the image. Left-Arrow Button Up-Arrow Button OK Menu/OK Button Right-Arrow Button Deleting Single Image in Playback Down-Arrow Button 1 2 3 4 5 Press Playback ( to be deleted. ) button. Press Left-arrow ( ) or Right-arrow ( ) to select the image Press DELETE ( ) button and a delete confirmation screen will pop out. Press Down-arrow ( ) button to select "YES" and press <Menu/OK> button to delete. Or, you may press <Menu/OK> button to select "DELETE" by pressing Up/Down arrow ( / ) button. Press <Menu/OK> button again to enter submenu. LiveView mode, repeatedly press the Right arrow ( ) button to select the AF Bracket from Center AF Right AF Left AF Multi-zone AF as below diagram. OK In Right arrow button ( ) Note: When Digital Zoom function is enabled, the AF Area Selection cannot function. The AF Bracket will be in red color if AF cannot function. Setting Image Resolution This camera provides 4 kinds of image resolution for settings ­ 4M (2272 x 1704 pixels), 4M 3:2 (2272 x 1520 pixels), 2M (1600 x 1200) and VGA (640 x 480 pixels). 1 2 Press <Menu/OK> button. Press Down-arrow ( ) or Up-arrow ( ) to select "RESOLUTION". 3 4 Press <Menu/OK> button to enter the submenu. Press Up-arrow ( ) or Down-arrow ( ) button to select. 5 Press <Menu/OK> button to apply the setting. -20- English Setting Image Quality This camera can set up the compression ration of JPG image. The best Image Quality is selected, the less image ratio is compressed but more image capacity will be occupied the memory. Three optional modes-- Best ( ), Better ( ) and Good ( ) are offered. 1 2 Press the <Menu/OK> button. Press UP/Down arrow ( / ) button to select "IMAGE QUALITY". Press <Menu/OK> button. 3 Press UP/Down arrow ( / ) button to setup the quality mode. Press the <Menu/OK> button. Setting Exposure Compensation 1 2 3 4 Press the <Menu/OK> button. Press Up-arrow ( ) or Down-arrow ( ) button to select "EV COMPENSATION". Press the <Menu/OK> button. Press Up-arrow ( ) or Down-arrow ( ) button to setup the EV value. [. . . ] (This camera uses mass storage so the computer will detect a hardware device. ) You will see a folder labeled "DCIM" is inside this drive. Click to open this folder, and then click again to open the next folder "nnnX430". (where nnn =100~999). Your video and image files are stored under this folder. NOTE: If you're using Windows XP, the Windows Wizard will open and you can select the operations offered by Windows to download, view, or play your digital files (shown next page). -33- English 4 To download the files to your computer, highlight the files that you want to save, and choose one of the following way to move your files. Copy & Paste Right-click on the highlighted files with and select "Copy" from the resulting menu. [. . . ]