User manual GENIUS KIDSBALL

[. . . ] Turn on your computer and Windows 95 will start. Insert the driver diskette into drive A (or B). After you have started Windows 95, if the "New Hardware Found" panel appears, we suggest you select "cancel" and follow the instructions below to install the driver. If you just want to install the driver only, select the second item "Driver from disk provided by hardware manufacturer", then type A:\ (or B:\) and OK to install the driver. [. . . ] If you didn't install the KidsBall driver under Windows 95/3. x, insert the backup copy of the KidsBall diskette to floppy drive A (or B). Under the C:\prompt, type: C:\A: (or B:) A:\GMOUSE <Enter> (or B:\GMOUSE <Enter>) KidsBall installed on COM2: (Port 3F8, IRQ 04) Absolute Coordinate enabled. The driver automatically detects KidsBall, and a message shows that the DOS KidsBall driver has been installed. The GMOUSE. COM driver also supports the "Parameters" setting. It lets you set certain conditions for KidsBall. The parameters are: Command line: GMOUSE/?/P -- Use Mouse Port (PS/2) for three buttons. file:///D|/KidsBall/html/kd-896. htm (4 of 7) [10/12/1999 10:37:50 AM] kd-896 /P2 -- Use Mouse Port (PS/2) for two buttons. /P3 -- Use Mouse Port (PS/2) for three buttons. -- Display help. Frame 46 GTEST Program This program lets you test the basic functions of KidsBall. Follow the directions below to run the test process. Before run the test program, sure the DOS Driver had installed. Run the DOS KidsBall Driver: GMOUSE. COM. Under the same drive and directory, type: GTEST Enter The test screen appears as shown below. To check KidsBall, move the cursor, click the mouse buttons, or draw a line to test KidsBall. Using the KidsBall Control Panel After you have installed the KidsBall driver in Windows 95/3. x, you can now use KidsBall. And for all programs, you can customize the right button to make it work the way you want it to. You just open the KidsBall Control Panel in the KidsBall Group or the Control Panel for Windows 95/3. x and double click on "KidsBall". Here's how to use the KidsBall Control Panel: 1. file:///D|/KidsBall/html/kd-896. htm (5 of 7) [10/12/1999 10:37:50 AM] kd-896 The left button does the same operation as the left mouse button. The second button is the right button of KidsBall. This button performs the same actions as if you were using the right mouse button. You can re-define this button so it acts like the "Enter" and "Esc" keys on the keyboard or when you "double click" the mouse button. [. . . ] The System property list appears on the screen. Select Device Manager and double click the left button on KYE GBALL. Select KidsBall to remove and click on the Remove button. If you install the KidsBall driver which runs Setup from the KidsBall driver diskette, then select one of the options below to remove the driver. [. . . ]