User manual GENIUS SPEED WHEEL 5 PRO

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installations, if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. [. . . ] If your system doesn't launch the installation software automatically, you can locate the file in the directory of your CD drive and click on it, then follow the on-screen instruction to install the software. After connection, system will "Find a new hardware" and complete the installation. Or a game pad with compatible electrical function design. Check the installation again if it is not correct. Set/Clear Turbo Function: Press and hold the TURBO button, then press any action Key 1, 2, 3, 4, 5, 6, 7, 8, 11, or Brake Pedal to set the turbo function for it. To release the Turbo function, repeat the same procedures. The Turbo/Macro speed will be adjusted cyclically from 2->4->8->16->2 Hz, each time the Key_10/START button is pressed. The following Key will act as each direction controlling: UP Key 5; DOWN Key 6; RIGHT Wheel Turn to right; LEFT Wheel Turn to left 2. Press Key9-Selecl 2 seconds again to release Direction_Key Mode. Key Mapping Functions: The main purpose of Key Mapping Function is to duplicate the function of SOURCE Key to TARGET KEY. [. . . ] Proceed the procedures again for each function releasing. The hardware function of the wheel buttons may vary in different games. [. . . ]