User manual GENIUS TWINWHEEL

[. . . ] Insert the driver's disc into the CD-ROM drive, and the setup program will start automatically. If not, start the setup program manually by selecting Start/Run and type in "E:\setup" (Where "E:" represents the location of the CD-ROM drive), then press the Enter key. (If you are using Windows 98, just follow the instructions on the screen to finish the installation) 3. [. . . ] The driver will work with the DirectX 7. 0a or a newer version in PC system. Please check the DirectX version on your system, and upgrade if necessary. 1 ENGLISH 2. The vibration effect occurs according to game software. For details, refer to the game software manual. B. Installation for PlayStation®2 and PlayStation® 1. Make sure you turn your game controller on. Plug the PlayStation's standard interface cable to the Play Station. When you finish the connection, you can now play any game. The game controller's function is according to the game software you are using. For details, refer to the game software manual. PlayStation®2 and PlayStation® Function 1. Analog Mode: When the controller is in analog mode, the following buttons and sticks may be operated in analog fashion depending on the features supported by the software title. Refer to the game software manual for details. PlayStation®2 format software Directional buttons / , , , buttons/ L1, R1, L2, R2, L3, R3 buttons. Digital Mode: When the controller is in digital mode, all function buttons are operated digitally. Vibration function The vibration function can be set to ON or OFF on the software option screen when the software supports. You can switch to the appropriate mode for use. [. . . ] Then push down one of the two pedals (should push it down over 10 degrees), at the same time, press one of the Analog buttons that you wish to set up. Then press the Program button again to complete the set up. Use the same steps to set up the other pedal. [. . . ]