User manual GENIUS WG-12PS

[. . . ] Install four AA batteries in the game pad 2. Insert the driver disc into the CD-ROM drive, and the setup program will start automatically. If not, start the setup program manually by selecting Start/Run and type in "E:\setup" (Where "E:" represents the location of the CD-ROM drive), then press the Enter key. (If you are using Windows 98, just follow the instructions on the screen to finish the installation) 4. [. . . ] Make sure you turn your game console on. Plug the PlayStation's standard interface of the receiver to the standard port on your game console. Press and hold the Connection/Vibration button of the game pad until the MODE LED flashes in green, then press the button of the receiver to connect with each other. Condition On line Off line LED ON OFF Connecting Flashes 5. When you finish the connection, you can now play any game. The game controller's function is according to the game software you are using. For details, refer to the game software manual. PlayStation®2 and PlayStation® Function 1. Analog Mode: When the controller is in analog mode, the following buttons and sticks may be operated in analog fashion depending on the features supported by the software title. Refer to the game software manual for details. PlayStation®2 format software Directional buttons / TM buttons / left analog stick / right analog stick / L1, R1, L2, R2, L3, R3 buttons PlayStation® format software Left analog stick / right analog stick / L3, R3 buttons. Digital Mode: When the controller is in digital mode, all function buttons are operated digitally, but the analog sticks will not work. 2 English 3. Vibration function: The game controller features a vibration function when the function is supported by the software title. The vibration function can be set to ON or OFF on the software option screen. You can switch to the appropriate mode for use. But some software makes this adjustment automatically. In such cases, the software overrides the A/D mode button. For details, refer to the game software manual. Important: 1. The driver will work with the DirectX 7. 0a or a newer version in PC system. Please check the DirectX version on your system, and upgrade if necessary. The vibration effect occurs according to game software. [. . . ] Power Saving Mode: When you stop operating this game pad for some time (shown below), it enters a "Power Saving" status to prevent battery usage. You can wake up it by pressing one of the key-buttons like Vibration/Connection, Mode, Select and Start. Condition On line Off line Mode Setting Time to Power Saving 2 Min 15 Sec 1 Min 4. Battery Status of the Receiver LED: When the Low-battery LED is Red, please change new batteries in game pad. [. . . ]