User manual GENUIS M712X

[. . . ] EN Macro Key Manager User Manual Macro Key Manager 14 Introduction Macro Key Manager is a kind of special tablet application software. Through Macro Key Manager, you can set up the keyboard events (Copy= "Ctrl+C") or hyperlinks which you use mostly. And then, save it as your favorite macro key profile. [. . . ] However, you can choose to disable the Macro Key Manager by click the right button. Once you disable Macro Key Manager or un-plug your tablet from PC, the original icon will be changed into icon " " -- 1. Click "New" and name the profile. If a profile is set for particular software, click the browser icon . If not, please skip this process and click "OK" to finish setting a new profile. Click "OK" to finish this setting. How to Set up a New Profile 16 -- 1. select the profile you want to modify 2. following macro key setting steps to modify 3. click "OK" How to Modify a Profile Macro Key Manager -- 1. select the profile you want to delete 2. click " Delete" How to Delete a Profile -- How to Set Up Macro Key Function a. click " Setting" to enable the setting function b. key-in the name you want to be as the macro key function hint (necessary) c. define the function as hot key or hyperlink d. click " Confirm " Setting: Hover the cursor to the macro key manager icon in the system tray, and then click the right button. Windows 2000/XP/Vista Basic Above Windows Vista Premium 17 ABOUT Macro Key Manager Showing Macro Key Manager Version , Driver Version and Firmware Version Show Show the Macro Key Manager User Interface. EnablE/ DisablE 18 Setting Macro Key Manager -- Macro Key Time You can set timer for how long macro key function will work. There are four different choices-- 0, 1, 1. 5 and 3 seconds can be your alternatives which mean that only when you use a pen to point the macro key area for 0, 1, 1. 5, or 3 seconds, the macro key works. -- Pointing Sound: You can choose to get the pointing sound or not while the pen tip is pointing on the tablet. 19 Macro Key Manager 20 Pen Pad (only in Windows 2000/XP/ Vista basic) This is tablet driver. [. . . ] On the "Buttons" tab, move the slider up and down to adjust the pen pressure from 0% to 8% (0% is the lightest, and 8% is the heaviest). Click the "Test" button to launch the "Click Pressure Test" writing area. Then you can test if the setting is correct. [. . . ]