User manual GENUIS P436

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1). This device may not cause harmful interference, and (2). This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. [. . . ] Shooting will stop when the shutter button is released. NOTE In Burst mode, the flash mode will be set to OFF automatically. Auto Exposure Bracketing (AEB) In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range. Press , , , and turn your camera on by pressing button. , then use to select the [FUNCTION] menu. to select [AEB], then press then press the 4. button. To exit from the menu, press the The indicator is displayed on the monitor screen. 6. Press the shutter button to shoot. NOTE In AEB mode, the flash mode will be set to OFF automatically. Selecting the Metering Mode You can select the metering mode that sets which part of the subject to measure to determine the exposure. Rotate the mode dial to P , , or pressing the 2. Press , , and turn your camera on by button. to select the , then use [FUNCTION] menu. Use or to select [METERING], then button. to select the desired metering mode, then press the button. [ AVERAGE]: Averages the light metered from the entire frame, but gives greater weight to the -31- English subject matter at the center. [ SPOT]: Meters the area within the spot automatic exposure point frame at the center of the LCD monitor. To exit from the menu, press the button. Compose your subject within the focus frame. Press the shutter button to capture the image. 7. PLAY MODE - THE BASICS Viewing Images You can display the still images you have just captured at a time. button to turn on the The last recorded image appears on the LCD monitor. To view the previous image, press the To view the next image, press the button. or to select the desired NOTE The playback information displayed on the LCD monitor will disappear after 1 second of time. If there is no image stored in the internal memory or on the memory card. [NO IMAGE] message will appear on the monitor. -32- English Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. [. . . ] * Y/M/D * D/M/Y * M/D/Y -62- English Item TV Description Sets video output system of the video equipment that you are going to connect to the camera. * PAL / NTSC LANGUAGE Sets the language that is displayed on the LCD monitor. Refer to section in this manual titled "Choosing the Screen Language" for further details. LCD BRIGHTNESS This sets the brightness of the LCD monitor. The adjustment range is from -5 to +5. USB Select to choose one of the following modes for further settings. [. . . ]