User manual GENUIS P513

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Press the shutter button to capture a "zoomed" image. NOTE The digital zoom function is not automatically cancelled after the image is captured. The digital zoom is only activated in single and self-timer shooting modes. 4MP and 5MP are made by F/W interpolation so the digital zoom is not available. -24- English Flash Set the flash for capturing images. The flash firing mode can be set to suit for the photographic conditions. When the camera is in Normal mode (the focus switch is set to . ), you can capture an image using a flash mode suitable to your circumstances. Toggle the , and press the SET button. button until the desired flash mode appears. 3. Compose the image and press the shutter button. The available flash settings in normal mode: Flash mode Description The flash will not fire. Select this mode when taking images in a place where flash photography is Flash off prohibited, or when the distance to the subject is beyond the effective range of the flash. The flash fires automatically according to the ambient lighting conditions. Select this mode for general flash Auto flash photography. -25- English Flash mode Description Use this mode to reduce the red-eye effect when you want to capture natural-looking photographs of Red-eye reduction people and animals in low-light conditions. When capturing photographs of people, the red-eye effect can be reduced by increasing the room lighting if possible and having your subject not look directly into the camera. The camera's pre-flash and slight delay in this mode will also help to improve your images. NOTE Flash off is the default setting. The flash mode is automatically set to off for close-up photography. If you will not be using the flash, turn it off. Turning the flash OFF will result in faster camera startup and faster operation because the capacitor will not be charged needlessly. Turning the flash OFF when not needed, will also improve battery life. Shooting Mode This sets the recording method at the time of capturing images. You can capture different still images including single, self-timer, continuous 1. 3MP and continuous VGA. and press the SET button. -26- English b. Select [Shooting] with the / buttons. c. Toggle the SET button to select the desired option item. Press the MENU button to exit from the menu screen. Compose the image and press the shutter button. This table below will help you choose the appropriate shooting mode: Shooting mode (No icon) Single Self-timer Description Captures an image at a time. [. . . ] It is being used in extreme low The batteries run out quickly. Many shots are being captured in dark places inside, requiring flash. Long period of continuous use of the camera or the flash. Measure Replace with a new set of batteries. Shooting Symptom Even if I press the shutter button, the camera does not shoot. Cause The batteries are running low. The internal memory or memory card does not have any free capacity. Measure Replace with a new set of batteries. [. . . ]