User manual GENUIS REMOTE 800

[. . . ] For more information, see "Teletext Buttons" later in this User Manual. 2 ENGLISH NAVIGATION BUTTONS Use the navigation buttons on the remote control to move between items on the screen in Media Center. Command START Task Takes the user to the Windows Media Center Start menu Icon UP Moves the pointer up one position DOWN Moves the pointer down one position LEFT Moves the pointer to the left one position RIGHT Moves the pointer to the right one position OK Performs the action at the focus point BACK Moves back one position in the user interface stack MORE Provides information about the pointer 3 ENGLISH PLAYBACK BUTTONS Playback buttons in the Media Center behave just like similar controls on common home electronic devices, such as CD or DVD players. Playback buttons are used to control the playback or display of your media ­ music, pictures, video, and radio. Command PLAY Task Starts playing media at the current position. [. . . ] The meaning of an increment depends on the type of media that is playing: · If a CD or playlist is playing, the previous song is played. · If a DVD is playing, the previous chapter is played. · If a slide show is playing, the previous picture is displayed. · If a recorded TV show is playing, playback skips backward 7 seconds. 5 ENGLISH AV AND POWER BUTTONS Use the AV and power buttons to change channels, adjust volume, access a DVD menu, or to put Media Center in standby mode. Command Task Icon PC PC POWER Puts the Windows Media Center computer into (STANDBY) standby mode if the computer is running. If the computer is in standby mode, the computer wakes from standby mode. TV POWER [if available] By default, the TV button has no command assigned to it. This button can "learn" to turn on the TV. For more information, see "Using the Remote Control Learning Functionality" VOLUME UP Increases the current volume by one unit. If the audio is currently muted when this button is pressed, muting is disabled and the volume increases by one unit. Decreases the current volume by one unit. For example, enter 300 to access the A-Z Teletext Index. To navigate between Teletext pages Press the UP and DOWN buttons on your remote control to navigate between Next and Previous pages. To use the Fastext buttons The red, green, yellow, and blue buttons on your remote control correspond to the same colored buttons on your TV. Press a colored button on your remote control to go to a preset page. 9 ENGLISH How to learn? Features: Except PC mode, TV, AV, and AUX modes are able to learn. The learning remains if the batteries have lost their power. The learning end by pressing the DVD menu or if you wait for five seconds. Instruction 1. Press the mode button you want to learn. The mode button will emit a blue light. 2. The indicator will blink once. Indicator 10 ENGLISH 3. Perform a head to head learning (about a 5cm gap) as shown below. Press the button on the other remote you want to learn for 2 seconds. [. . . ] The buttons learned in the mode you chose to delete will all be deleted. 11 ENGLISH Warning: CAUTION: any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Federal Communications commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]